Back to old site

If there is anything in your cart, it will not be brought over to the old site.

$0 Hazmat Fee On All Primer & Powder Orders - STOCK UP NOW!

$0 Hazmat Fee On All Primer & Powder Orders - STOCK UP NOW!

430102429_1.jpg
430102429_5.jpg
430102429_1.jpg
430102429_1.jpg
430102429_5.jpg
430102429_1.jpg
None
None OFF

MDT S90 BRACKET FOR SEND IT MV3 & SPUHR MOUNTS

S90 Bracket For The Send iT MV3 & Spuhr Mounts
Brownells #
430102429
MFR #
107203-BLK
UPC
682157410316
$64.95
Coupon Code
Purchase Limit Help

In stock

Can we ship this to you? (US only)
{{restriction.odmShipCheckMessage}}
Specifications
Restriction
Can we ship this to you? (US only)
{{restriction.odmShipCheckMessage}}
Description
Send iT MV3 Level sold separately. LRA S90 Bracket Allows the Send iT MV3 to be mounted directly to Spuhr’s SP, SA, SS, and ST models in the vertical Position.
Attention! Some mounts may require Spuhr A-0001: Spacer 4mm. Contact your Spuhr dealer for specific applications.
Included:
LRA S90 Bracket
#8-32 screw (1)
4mm x 10mm screws (2)
**Warning** Screw lengths MUST be checked PRIOR to attaching the mounts. In some applications the screw can “bottom out” against the scope tube or damage other components if the screw length is excessive or the wrong size/thread pitch is used. YOU are RESPONSIBLE to check the length and size of screws and verify interferences before final assembly. LRA is not liable for damage to our products or the products they are being mounted or attached to.
Step 1- Attach the LRA S90 to the Spuhr mount using the (2) supplied 4mm x 10mm flat head screws using either an IP20 or T20 Torx Plus or Torx drive. Torque both screws to 20-25 in-lbs.
Step 2- attach the Send iT MV3 to the LRA S90 bracket. Follow the instructions included with the Send iT MV3 for removal of the Picatinny mount (link below). Carefully fit the Send iT into the pocket of the LRA S90 bracket by hand and confirm it’s sitting flat and fully seated BEFORE installing the screw. Install and torque the (1) supplied # 8-32 Flat head screw to 30-34 in-lbs using a 3/32 Allen drive.
LONG RANGE ARMS - LRA S90 BRACKET FOR SEND IT MV3 & SPUHR MOUNTS
Made in the U.S.A.
Guaranteed. Forever.
Please select a FFL Dealer

or
7 dealers near
Distance:
10miles
arrow-down
Sort by:
Nearest first
arrow-down
pin wrong
No dealers found

Please search by another zipcode to find the nearest dealer.

Close
Brownells Retail Store
Pin in
Clock
You must select required check box

Note:

Listed hours & fees are not guaranteed and subject to change. Please contact the dealer to confirm current hours & fees.
* Must accept required fields.
  • Pin in Brownells Featured Dealers

    Choosing a Brownells Featured Dealer is the fastest and easiest way to complete your purchase. Brownells Featured Dealers have agreed to perform FFL transfers on guns purchased online from Brownells. We have their necessary FFL information on file and your FFL order will ship directly to them once processed.

  • Pin in Standard Dealers

    Standard Dealers have not yet agreed to perform FFL transfers on guns purchased online from Brownells. If you choose a Standard Dealer, you are responsible for contacting that dealer and arranging for the dealer to submit a signed copy of an FFL and to give Brownells permission to ship the gun.

  • Pin in Not Available Dealers

    Not Available Dealers are dealers Brownells cannot ship guns to at this time. These dealers either do not meet our requirements for FFL transfers, or prefer to not perform transfers for guns purchased online from Brownells.

Switch view map
7 dealers near

You May Also Like

Right Badge OFF  
5 Stars

200

300

Customers Also Viewed

Right Badge OFF  
5 Stars

200

300