Back to old site

If there is anything in your cart, it will not be brought over to the old site.

Today Only - CCI Sm. Rifle & Sm. Pistol Primers Just $69.99 + No Hazmat Fee - Stock Up!

Today Only - CCI Sm. Rifle & Sm. Pistol Primers Just $69.99 + No Hazmat Fee - Stock Up!

l_080451001_1.jpg
l_080451001_1.jpg
l_080451002_5..jpg
l_080451002_4.jpg
l_080451002_2.jpg
l_080451002_3.jpg
l_080451003_2.jpg
l_080451003_3.jpg
l_080451003_4.jpg
l_080451003_5..jpg
l_080451004_3.jpg
l_080451004_5..jpg
l_080451004_2.jpg
l_080451004_4.jpg
l_080451005_5..jpg
l_080451005_4.jpg
l_080451005_3.jpg
l_080451005_2.jpg
l_080451006_4.jpg
l_080451006_2.jpg
l_080451006_3.jpg
l_080451006_5..jpg
l_080451007_2.jpg
l_080451007_3.jpg
l_080451008_4.jpg
l_080451008_3.jpg
l_080451008_5..jpg
l_080451008_2.jpg
l_080451009_3.jpg
l_080451009_2.jpg
l_080451009_4.jpg
l_080451009_5..jpg
l_080451010_2.jpg
l_080451010_3.jpg
l_080451010_4.jpg
l_080451010_5..jpg
l_080451011_4.jpg
l_080451011_2.jpg
l_080451011_3.jpg
l_080451011_5..jpg
l_080451012_1.jpg
l_080451013_3.jpg
l_080451013_2.jpg
l_080451013_4.jpg
l_080451013_5..jpg
l_080451014_3.jpg
l_080451014_2.jpg
l_080451014_5..jpg
l_080451014_4.jpg
l_080451015_2.jpg
l_080451015_5..jpg
l_080451015_4.jpg
l_080451015_3.jpg
l_080451016_5..jpg
l_080451016_3.jpg
l_080451016_2.jpg
l_080451016_4.jpg
l_080451017_3.jpg
l_080451017_2.jpg
l_080451017_5..jpg
l_080451017_4.jpg
l_080451018_4.jpg
l_080451018_3.jpg
l_080451018_2.jpg
l_080451018_5..jpg
l_080451019_3.jpg
l_080451019_5..jpg
l_080451019_4.jpg
l_080451020_5..jpg
l_080451020_2.jpg
l_080451020_4.jpg
l_080451020_3.jpg
l_080451001_1.jpg
l_080451001_1.jpg
l_080451002_5..jpg
l_080451002_4.jpg
l_080451002_2.jpg
l_080451002_3.jpg
l_080451003_2.jpg
l_080451003_3.jpg
l_080451003_4.jpg
l_080451003_5..jpg
l_080451004_3.jpg
l_080451004_5..jpg
l_080451004_2.jpg
l_080451004_4.jpg
l_080451005_5..jpg
l_080451005_4.jpg
l_080451005_3.jpg
l_080451005_2.jpg
l_080451006_4.jpg
l_080451006_2.jpg
l_080451006_3.jpg
l_080451006_5..jpg
l_080451007_2.jpg
l_080451007_3.jpg
l_080451008_4.jpg
l_080451008_3.jpg
l_080451008_5..jpg
l_080451008_2.jpg
l_080451009_3.jpg
l_080451009_2.jpg
l_080451009_4.jpg
l_080451009_5..jpg
l_080451010_2.jpg
l_080451010_3.jpg
l_080451010_4.jpg
l_080451010_5..jpg
l_080451011_4.jpg
l_080451011_2.jpg
l_080451011_3.jpg
l_080451011_5..jpg
l_080451012_1.jpg
l_080451013_3.jpg
l_080451013_2.jpg
l_080451013_4.jpg
l_080451013_5..jpg
l_080451014_3.jpg
l_080451014_2.jpg
l_080451014_5..jpg
l_080451014_4.jpg
l_080451015_2.jpg
l_080451015_5..jpg
l_080451015_4.jpg
l_080451015_3.jpg
l_080451016_5..jpg
l_080451016_3.jpg
l_080451016_2.jpg
l_080451016_4.jpg
l_080451017_3.jpg
l_080451017_2.jpg
l_080451017_5..jpg
l_080451017_4.jpg
l_080451018_4.jpg
l_080451018_3.jpg
l_080451018_2.jpg
l_080451018_5..jpg
l_080451019_3.jpg
l_080451019_5..jpg
l_080451019_4.jpg
l_080451020_5..jpg
l_080451020_2.jpg
l_080451020_4.jpg
l_080451020_3.jpg
None
Coupon Coupon OFF

BROWNELLS FIXED BLADE GUNSMITH'S SCREWDRIVERS™

Blade Thickness
Model Number
#2 Fixed-Blade Screwdriver .120 Shank .040 Blade Thickness
Brownells #
080451002
MFR #
NO. 2 FIXED BLADE SCREWDRIVER
UPC
$12.99
Coupon Code B15OFF
Purchase Limit Help

In stock

Specifications
Model Number:
#2 -- 0.120 Shank
Blade Thickness:
0.04
Screwdriver Style:
Parallel Tip/Hollow Ground
Restriction
Description

THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the workpiece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing. Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver. THE SHANK DESIGN The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrindings and reshapings while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades. Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly. HANDLE CUSTOM-DESIGNED FOR YOU The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set.


SPECS: 2Ѕ" (6.3cm) long shanks. 3ѕ" (9.5cm) long x 1"(2.5cm) dia. handle. Each screwdriver packed in individual plastic tube.


Video poster
Please select a FFL Dealer

or
7 dealers near
Distance:
10miles
arrow-down
Sort by:
Nearest first
arrow-down
pin wrong
No dealers found

Please search by another zipcode to find the nearest dealer.

Close
Brownells Retail Store
Pin in
Clock
You must select required check box

Note:

Listed hours & fees are not guaranteed and subject to change. Please contact the dealer to confirm current hours & fees.
* Must accept required fields.
  • Pin in Brownells Featured Dealers

    Choosing a Brownells Featured Dealer is the fastest and easiest way to complete your purchase. Brownells Featured Dealers have agreed to perform FFL transfers on guns purchased online from Brownells. We have their necessary FFL information on file and your FFL order will ship directly to them once processed.

  • Pin in Standard Dealers

    Standard Dealers have not yet agreed to perform FFL transfers on guns purchased online from Brownells. If you choose a Standard Dealer, you are responsible for contacting that dealer and arranging for the dealer to submit a signed copy of an FFL and to give Brownells permission to ship the gun.

  • Pin in Not Available Dealers

    Not Available Dealers are dealers Brownells cannot ship guns to at this time. These dealers either do not meet our requirements for FFL transfers, or prefer to not perform transfers for guns purchased online from Brownells.

Switch view map
7 dealers near

You May Also Like

Right Badge OFF  
5 Stars

200

300

Customers Also Viewed

Right Badge OFF  
5 Stars

200

300