AREA 419 ZERO M-SERIES SIZING DIES

The ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries.

As Reloaders, Area 419 knew they needed a die to do certain things, but as the makers of the ZERO Reloading Press, Area 419 also learned a huge amount about what other dies did well or did poorly, and what customers were struggling with on a daily basis.

With the ZERO M-Series Sizing Die, Area 419 produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders.

Sizing brass doesn’t have to be complicated. It doesn’t have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle – they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die.

NOTE: THIS IS A 1-1/4″ DIE, AND REQUIRES A HYBRID OR 1-1/4″ TURRET ON YOUR ZERO (OR OTHER PRESS). IT CANNOT BE USED WITH A 7/8″ TURRET OR OTHER 7/8″ PRESS.

WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov