Back to old site

If there is anything in your cart, it will not be brought over to the old site.

l_080000653_1.jpg
l_080000652_1.jpg
l_080000653_1.jpg
l_080000653_1.jpg
l_080000652_1.jpg
l_080000653_1.jpg
None
None OFF

BROWNELLS DELUXE PUNCH BENCH SET

Kit
Deluxe Punch Set Bench Block Only
Brownells #
080000652
MFR #
BROWNELLS DELUXE PUNCH SET BEN
UPC
050806006560
$12.99
Coupon Code
Purchase Limit Help

Out of Stock

Can we ship this to you? (US only)
{{restriction.odmShipCheckMessage}}
Specifications
Kit:
Partial
Restriction
Can we ship this to you? (US only)
{{restriction.odmShipCheckMessage}}
Description

This deluxe punch set gives you a versatile selection of 20 punches to easily start, remove and install pins, align holes, plus drift and stake sights without marring the part or firearm finish. We combined alignment punches, flat tip mini punches, starter punches, a nylon drift punch, and a center and prick punch with our most popular pin punches, then added a machined Delrin® bench block to hold and organize them all for easy access. Punches are constructed of hardened steel with parallel-ground shanks and either knurled or hexagonal handles. The nylon drift punch is solid nylon and can be shaped for your specific application. Alignment punches feature a tapered pin with a working length almost 3" long to help ensure a tight fit with any size diameter hole size between the minimum and maximum outside diameter of the punch. Each punch minimum diameter overlaps slightly with the next larger punch to prevent any possible gaps in hole coverage. Mini punches are small diameter punches with a flat tip that provide excellent control because of their short length. Ideal for precision work and tight spots where a full-length punch just won’t fit. Use the starter punches to start the removal of roll or spring pins without causing damage to the pins or the punch. Short shafts give more control by putting your hand closer to the pin and prevents bending the longer, standard roll pin punches. Prick punch has a fine, sharp point for marking spots before center punching and staking sights. Gives better visibility and more precision to your marking. Use the center punch after the prick punch to deepen the mark for precision drilling. The pin punches are used after the starter punch to finish drive the roll pin or spring pin. Bench block is also available separately.

SPECS: Steel, knurled or hexagonal handle, except nylon drift punch is solid nylon. Nylon Punch - Contains (1), 4” (10cm) long x 5/16” (7.9mm) diameter. Alignment Punches - Contains (1) of each diameter: .070” (1.8mm) to .156” (4.0mm); .110” (2.8mm) to .187” (4.7mm); .150” (3.8mm) to .219” (5.6mm). Taper length: 2Ѕ” (6.3cm) to 3” (7.6cm). Mini Punches - Contains (1) of each diameter: 1?16" (1.6mm), 5?64" (2mm), 3?32" (2.4mm), 2ѕ” (7cm) long. Starter Punches - Contains (1) of each diameter: 1?16", 5?64" 3?32", 1?8" (3.2mm), 4” long. Prick Punch - Contains (1), 5?16" x 4” long. Center Punch - Contains (1), 5?16" x 4” long. Pin Punches - Contains (1) of each diameter: 1?16", 5?64" 3?32", 1?8", 4” long; 3?32" x 4Ѕ” (11.4cm) long, 1?8" x 4ѕ” (12.1cm) long, 5?32" (4mm) x 5” (12.7cm) long. Bench Block - Delrin, tan. 8” (20cm) long, 3” wide, ѕ” (1.9cm) high. Holds all 20 punches.

Available options: 
080000652 080000653
Please select a FFL Dealer

or
7 dealers near
Distance:
10miles
arrow-down
Sort by:
Nearest first
arrow-down
pin wrong
No dealers found

Please search by another zipcode to find the nearest dealer.

Close
Brownells Retail Store
Pin in
Clock
You must select required check box

Note:

Listed hours & fees are not guaranteed and subject to change. Please contact the dealer to confirm current hours & fees.
* Must accept required fields.
  • Pin in Brownells Featured Dealers

    Choosing a Brownells Featured Dealer is the fastest and easiest way to complete your purchase. Brownells Featured Dealers have agreed to perform FFL transfers on guns purchased online from Brownells. We have their necessary FFL information on file and your FFL order will ship directly to them once processed.

  • Pin in Standard Dealers

    Standard Dealers have not yet agreed to perform FFL transfers on guns purchased online from Brownells. If you choose a Standard Dealer, you are responsible for contacting that dealer and arranging for the dealer to submit a signed copy of an FFL and to give Brownells permission to ship the gun.

  • Pin in Not Available Dealers

    Not Available Dealers are dealers Brownells cannot ship guns to at this time. These dealers either do not meet our requirements for FFL transfers, or prefer to not perform transfers for guns purchased online from Brownells.

Switch view map
7 dealers near

You May Also Like

Right Badge OFF  
5 Stars

200

300

Customers Also Viewed

Right Badge OFF  
5 Stars

200

300