MARK II SAFETY

MARK II SAFETY Reviews & Ratings

Graceful design sets low, allowing lowest possible scope mounting. One-piece construction, beautiful, non- glare, blued finish. Right-hand operation only. Easily installed, requiring slotting of bolt sleeve. SPECS: ?' (19mm) long arm, 3/16' (4.8mm) wide. Blued steel.
View Product
Write a review
Reviews Summary
The MARK II SAFETY product receives mixed feedback. Customers appreciate its affordability and functionality after installation, but many note that it requires significant modification and lacks clear instructions. Concerns about product quality and safety reliability are also highlighted, especially regarding the use of cheap materials and designs prone to failure.
What Reviewers Are Saying
Installation Difficulty
70%
Many reviewers express that installing the MARK II SAFETY requires significant alterations to the rifle and can be quite challenging. The necessity for precision in modifications, such as grinding and cutting, is often emphasized, with several users recommending professional gunsmith assistance for optimal results.
Product Quality
65%
There are numerous complaints regarding the overall quality of the safety. Reviewers note poor finish details, the presence of casting marks, and the use of potentially unreliable materials, which raise concerns about durability and long-term functionality.
Instructions and Guidance
60%
The provided installation instructions are frequently criticized for being unclear or inadequate. Many users report needing to figure out the installation process through trial and error rather than relying on the manual, leading to frustration during the setup.
Value for Money
50%
Despite its drawbacks, several customers feel that the MARK II SAFETY offers good value for its price. Its affordability is often highlighted, with some users noting that it is difficult to find similar products at a lower cost, even if it may require significant work to install.
Safety Functionality
55%
Reviewers report mixed experiences regarding the safety's effectiveness. While some users find it works satisfactorily, others express concerns about its reliability, especially matters related to locking mechanisms and potential safety failures during operation.
5
An excellent upgrade
I've used these before, which is why I purchased another. A square notch must be cut into the bolt sleeve, but this is easily accomplished with a moto tool. This notch serves to retain the safety. One of the less obvious advantages of this safety compared to others is the one piece design. Nothing to come loose or fall off. A proven, well designed product.
Would you recommend this? Yes, I would recommend to a friend
5
Mauser Part
Mauser 96 safety received on time and the part was good as promised. Modifying the the bolt was easy after careful figuring out how it supposed to work. The guide that came with was not much of help. Over all I'm happy with the results>
5
very good safety
works very well on the 93-96 Mauser action, you will need to fit this product, i used a dremell with a cutting wheel to cut the notch in the bolt shroud, remove bolt shroud and cocking piece, install safety in shroud and push as far as you can to the down or off position that is where you will need to cut a small notch, remove a small amount at a time,test the cocking piece in the shroud with safety in place (off ) position,then you can see how much more to remove so the handel on the safety is down as far as it needs to clea,r the cocking piece should go in and out with no effort, you may need to bevel the cocking to engage safety on, remember remove very little at a time look close how the safety works before you start