Veterans Day Saving Continue! - Take 17.76% Off Almost Everything
Use Code: HONOR1776

$0 Hazmat Fee On Powder & Primers - Use Code: NOHAZMAT

AR-15 CLAMP ON ADJUSTABLE GAS BLOCK Reviews & Ratings

The Superlative Arms Patented Bleed Off® Mode, direct impingement, gas block for the AR-15/AR-10/LR-308 platform adjusts the gas flow by bleeding the gas out the front of the block instead of restricting the flow like conventional adjustable blocks.

RESULTS:

The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas and pressure are bled out of the block allowing the system to run much cleaner and cooler.
Reduction of wear on the bolt carrier group components and upper receiver.
Reduction of felt recoil allowing for faster follow-up shots.
Patented adjustment detent is located outside of the block and therefore no contamination.
In Bleed Off Mode the gas adjustment screw does not restrict the gas flow; therefore, there is no erosion or seizing of the screw, and no loss of detent due to carbon build up. Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out.
When using SBR’s and/or suppressors the Bleed Off port allows the excessive pressure to be exhausted out of the block reducing blow back.

FEATURES:

Direct Impingement: DI Adjustable Gas Blocks
Gas Block Style: Clamp On
Gas Block Material: Stainless Steel or Titanium

SPECIFICATIONS:

GAS BLOCK:

Gas Block Material: 416 Stainless Steel or Titanium
Attachment Type: Clamp On
Weight: 1.84 oz.
Length: 1.00"
Gas Adjustment: (Patented) 30 locked positions, front of block
Bleed Off Port: (Patented) Front of block which vents forward away from operator

INCLUDED:

(1) Gas Block - Assembled
(2) 6-32 x 3/8" Torx T-15 Cap Screws
(1) Gas Tube Roll Pin
(1) 3/32" x 6" L-Shaped Hex Key, Ball-end Allen / Torx T-15 Tool
(1) Instructions for installation and setup

See all of our AR15s and AR15 parts here.

View Product

Write a review

5 Stars

89%

4 Stars

3 Stars

2 Stars

1 Stars

11%

Reviews Summary

Overall, customers are impressed with the AR-15 Clamp On Adjustable Gas Block, praising its design, machining quality, and ease of installation. Many recommend it for suppressor use, highlighting its performance. However, some raise concerns about carbon fouling and issues with the gas settings. Instructions received positive feedback, although a few suggested a tool-less version could enhance usability.

What Reviewers Are Saying

Product Quality

75%

Reviewers consistently highlight the high machining quality and effective design of the gas block. Many find it well-made and appropriate for various uses, indicating overall satisfaction.

Ease of Installation

70%

The installation process is frequently mentioned as straightforward due to clear and concise instructions, making it accessible for users even with limited experience.

Performance with Suppressors

55%

Several users specifically appreciate the gas block's performance in suppressor applications, noting it effectively reduces gas blowback and enhances shooting comfort.

Carbon Fouling Issues

30%

A notable concern among some users is the substantial carbon build-up that occurs with the bleed-off mode, indicating potential maintenance challenges for the barrel.

Adjustment Features

25%

While reviewers appreciate the adjustment capabilities, some expressed interest in a tool-less version for enhanced convenience, reflecting a demand for future product improvements.

Customer Photos & Videos

Sort by Filter by rating

Worked well on 6 ARC

I had a regular gas block on my 6 ARC and the gun was trying to tear itself apart. It was covered in carbon and was smashing cases. I put the adjustable gas block and slow dialed it up until cases were ejecting right at 3 o'clock. The recoil got better and accuracy improved because the bolt was staying closed until the bullet left the barrel. It went from a 1.5 MOA gun to a .6 MOA gun with my reloads and Shilen barrel.

Would you recommend this? Yes, I would recommend to a friend

by ROBERT F. on May 22, 2026

Verified Purchase

Was this review helpful? 0

Well made adjustable gas block

I received and installed a clamp on version of this gas block. My initial impression is that it is well machined and designed. The included instructions covered installation and adjustment. They are very clear and concise. Brownells had a good price and shipped it out quickly.

Would you recommend this? Yes, I would recommend to a friend

by STEVEN M. on March 26, 2026

Verified Purchase

Was this review helpful? 1

Great adjustable gas block, perfect for suppressor use.

This gas block is perfect suppressor use, to prevent the gas blast in your face from being over gassed,

Would you recommend this? Yes, I would recommend to a friend

Quality

Installed on a AR308 with a suppressor for pig hunting at night. Its well designed and easy to adjust. I recommend you read the instructions tho. I also hope they make a tool-less adjustable version in the future. Thx

by BEN K. on June 15, 2025

Verified Purchase

Was this review helpful? 2

Great Gas Block

Works flawlessly.

by MICHAEL G. on February 07, 2025

Verified Purchase

Was this review helpful? 0

Pro tip

When you seat the gas tube and pin it and check it by blowing in to it no air will come out no matter how many times you remove the pin and repin it. Why? Well color me stupid, because it arrives FULLY closed. Now if you can't laugh at yourself for that, tinkering is not the sport for you. Still in the build process, but all looks good. Positive clicks, allen key comes with it.

Would you recommend this? Yes, I would recommend to a friend

by Kenneth S. on July 28, 2024

Verified Purchase

Was this review helpful? 6

AR-15 CLAMP ON ADJUSTABLE GAS BLOCK

Works really well , very pleased with this product

by STEWART S. on April 28, 2024

Verified Purchase

Was this review helpful? 1

Works great on my Faxon barrel

Installed on my 16in Faxon barrel and had it adjusted correctly in minutes. Instructions were easy to understand and operates flawlessly. I would highly recommend using this over a standard gas block. Cost more, but it beats swapping buffers especially if you dont have every weight in your range bag when setting up your rifle for the first time and it cuts down weight if you needed a heavy buffer to balance your gas system.