DURACOAT AEROSOL Reviews & Ratings

Unique Can-within-a-Can technology provides the hardener right inside the can. No more measuring & mixing. Just release the hardener and shake. Provides protection against rust and corrosion, plus excellent uv protection. Can be applied to all types of metal, plastic, and wood. Can be applied over bare metal, Parkerizing, anodizing, and bluing. Remains useable for up to 48 hours once activated. Enough for 2-4 firearms. No baking or preheating required.

Adjustable nozzle for vertical or horizontal spray.

View Product

Write a review

Reviews Summary

Duracoat Aerosol provides varied experiences among users. Many appreciate its durability and finish when applied correctly, while some encountered issues with nozzle performance and paint adhesion. Users recommend thorough prep work and cautioning against runs with multiple light coats. Overall, it’s a viable option but has its drawbacks.

What Reviewers Are Saying

Application and Usage

78%

Users generally find Duracoat Aerosol easy to apply, provided they follow the instructions carefully. The importance of thorough prep work and the technique of applying multiple light coats are emphasized for achieving the best results.

Finish Quality

65%

While many reviews praise the durability and overall finish of the product, some report a slick or glossy appearance that does not meet their expectations for a specific type of finish. Users often highlight good coverage, but results can vary significantly depending on application methods.

Durability and Performance

55%

Durability is a positive aspect frequently mentioned by reviewers who have used the product correctly. However, several reviews highlight issues with the paint flaking or coming off easily after curing, indicating inconsistency in long-term performance.

Packaging and Nozzle Issues

50%

A notable issue raised is related to the can's nozzle performance. Many users experienced problems such as sputtering or loss of pressure, which hindered their ability to complete projects effectively. This issue has caused some frustration among users.

Value for Money

48%

The cost of Duracoat has been a mixed point among users. While some feel it offers good value for the results achieved, others express concern that it is expensive compared to similar products that provide better results or coverage.

Sort by Filter by rating

Order 2 cans..

Picked this up to try on a couple AK's. It suggest 3 coats. I was not able to get the 2nd coat finished on both rifles parts before the can petered out. It does look good though but not sure how it will hold up. Both rifles were parkerized prior to painting. It was easy to use and no mixing/etc as with my cerakote but I feel the cerakote would last longer.

Let down for $50 a can

The color was a touch dark for Parker and a little shiny. It went on thinner than the black. You need to be real careful or you will get runs. Didnt seem to cover as well as the black. You really need to prep it good for it to work. Be aware it takes 3-4 weeks to fully harden and can be scratched off before. Not sure on how well it will last.

Way too glossy

The color is just right, but the gloss ruins it. So, if you're looking for a parkerized finish, this isn't it. Despite that, it sprays on very well and easily. Clean your parts throughly, follow the instructions precisely and you'll be fine. You can easily finish 3 handguns or 1 rifle and 1 handgun with 1 can. P.S. If you're stuck between this and alumahyde, get alumahyde. The only thing better about Duracoat is the nozzle. The alumahyde nozzles are horrible, but both products require 3 weeks to fully cure.

Maybe??

I certainly can't fault the product because of my ineptness, however, it can be difficult to use. It does have a tendency to run at overlap points, so it's best to take your time and let your previous coat "dry" in between coats. The paint does cover well just remember to fully depress the nozzle so you are getting the proper mix of paint and hardener together or you'll end up with some dreadful looking stuff that can be hard to get rid of with out mucking up the project. As for the sheen, I have not tried a flat color, but the Coyote Tan when dried is shinny. Expensive too as the product should be much, much better for the cost.

MAgpul FDE, OK.

Used on a Glock slide, Geisselle mk4 rail and 2 mags with one can. Not bad, easy to apply with some extra prep work. The color is slightly off and stays with the wet look. It is not tactical flat in any way. Overall, OK.