DURACOAT FINISHES, LLC - DURACOAT AEROSOL

I’ve used this stuff as a gunsmith, results are fantastic if you take your time. I don’t really have anything bad to say about this product but it requires that I put in a con

Decided to give this a shot even though I’ve always rattle canned in the past. I made sure to thoroughly prep and mask off before using it. Took my time and followed the instructions. Finish turned out excellent. Krylon is faster but this will hold up better.

Dura coat is a great finish for firearms, after curing is it almost indestructible. I have used this product in various colors for years and have never been disappointed.

This product is pretty simple to use. Just follow the directions on the can. I chose to shake the can for 3 minutes instead of 2. use light coats, you can respray after 5 minutes, I chose to wait 10 minutes between coats. I sprayed 3 light coats then stopped. It cures in 24 hours, so the next day I repeated the spray. After mixing the can, the paint will last 3-4 days before setting up, so get stuff painted within that time frame. Be sure to hold the can upside-down and spray for 2-3 seconds to clear the paint from the nozzle between cure times. I was able to paint several items, (including my thumb) it worked like a charm.

I bought this to do parts and match the Magpul FDE color on a build. I took the small parts for my AR and 1500 grit sanded them. Washed with a soap and water degreaser and dried them. After following directions on the can I painted the parts. I gassed them off with a hair dryer and recoated after 5 min of dry time. I used 3 coats total. Coating and spraying was easy. Good nozzles, even flow and kept back about 8" when applying the coats. Overnight the parts air dried. Looked good. I touched up 1 part and all parts dried 1 more day. They turned out awesome! Durable. Good coverage and sheen and durable finish. Assembled on rifle and it matched my FDE factory parts great. Highly recommend this. Will be doing many more.