ULTIMATE 1911 SEAR JIG

ULTIMATE 1911 SEAR JIG Reviews & Ratings

Aluminum jig uses two rollers to guide your stone evenly over the sear to let you get the exact angle for a crisp, clean trigger pull. Three modes allow you to pre-set, mate, and set up for secondary stoning to ensure that the hammer-sear engagement is precisely set. An adjustable angle mode is also available for experimenting with different angles. Brass rollers prevent over-stoning the sear and an adjustable insert and knob work with the sear block to lock the sear in place to prevent movement. SPECS: Aluminum block, brass rollers. Includes instructions.
View Product
Write a review
Reviews Summary
Overall, the ULTIMATE 1911 SEAR JIG is well-received by users who appreciate its ease of use and accuracy. However, some note issues with measurement reliability and slight design flaws. Experienced builders value its precision, while newcomers find it accessible. Improvements in sear pin sizing and the wingnut design have been suggested.
What Reviewers Are Saying
Ease of Use
50%
Many users find the jig easy to set up and operate, highlighting clear instructions and user-friendly design. This theme resonates especially with beginners in gunsmithing who appreciate the straightforward approach of the jig.
Precision and Quality
60%
Reviewers emphasize the jig’s ability to create precise finishes on sears and hammers, making it a favorable choice for both hobbyists and seasoned builders. The quality of the tools is often compared favorably against other options in the market.
Design Flaws
40%
Several users pointed out design issues, such as the adjustment wingnut causing misalignment and the sizing of the sear pin holes being smaller than typical. This has led to some frustration, suggesting room for improvement in future iterations.
Communication and Support
30%
There are mentions of unresponsive customer support, especially concerning requests for correctly sized sear pins. This has left some users feeling unattended, impacting their overall satisfaction with the product.
Value for Money
50%
Many users agree on the jig's value in terms of quality and performance, reinforcing the notion that investing in good tooling is essential in gunsmithing. It's considered one of the better options available without excessive expense.
3
Worked Moderate
Ok let me start by saying i am new to gunsmithing, more a hobby than any thing. BUT here is my review on this item The problems i had is the wingnut on the back side of this photo that holds the block high adjustment in place puts the block in to a slight angle when tightened, Not sure it is enough to make a difference. But when you tighten that nut it does tend to lift the bock up and change the cut height of the sear. kind of a pita I think the idea is good but the mfg of the item leaves me a little cold.