Back to old site

If there is anything in your cart, it will not be brought over to the old site.

l_080607210_1.jpg
l_080605012_1.jpg
l_080605016_1.jpg
l_080605020_1.jpg
l_080605041_1.jpg
l_080605041_3.jpg
l_080605041_2.jpg
l_080606110_1.jpg
l_080606112_1.jpg
l_080606116_1.jpg
l_080606120_1.jpg
l_080606141_1.jpg
l_080607210_1.jpg
l_080607212_2.jpg
l_080607212_3.jpg
l_080607216_1.jpg
l_080607220_1.jpg
l_080607241_1.jpg
l_080608510_2.jpg
l_080608510_3.jpg
l_080608510_4.jpg
l_080608510_5..jpg
l_080608512_1.jpg
l_080608516_5..jpg
l_080608516_2.jpg
l_080608516_4.jpg
l_080608516_3.jpg
l_080608520_5..jpg
l_080608520_2.jpg
l_080608520_4.jpg
l_080608520_6.jpg
l_080608520_3.jpg
l_080608541_5..jpg
l_080608541_2.jpg
l_080608541_4.jpg
l_080608541_3.jpg
l_080607210_1.jpg
l_080605012_1.jpg
l_080605016_1.jpg
l_080605020_1.jpg
l_080605041_1.jpg
l_080605041_3.jpg
l_080605041_2.jpg
l_080606110_1.jpg
l_080606112_1.jpg
l_080606116_1.jpg
l_080606120_1.jpg
l_080606141_1.jpg
l_080607210_1.jpg
l_080607212_2.jpg
l_080607212_3.jpg
l_080607216_1.jpg
l_080607220_1.jpg
l_080607241_1.jpg
l_080608510_2.jpg
l_080608510_3.jpg
l_080608510_4.jpg
l_080608510_5..jpg
l_080608512_1.jpg
l_080608516_5..jpg
l_080608516_2.jpg
l_080608516_4.jpg
l_080608516_3.jpg
l_080608520_5..jpg
l_080608520_2.jpg
l_080608520_4.jpg
l_080608520_6.jpg
l_080608520_3.jpg
l_080608541_5..jpg
l_080608541_2.jpg
l_080608541_4.jpg
l_080608541_3.jpg
None
Coupon Coupon OFF

BROWNELLS SHOTGUN BARREL POLISHING FLEX HONE®

Gauge
Model Number
10 Gauge Fine Flex Hone, Chamber
Brownells #
080608510
MFR #
00611 10 GA. CHAMBER FLEX HONE
UPC
050806019256
$45.99
Coupon Code FLASHBRN
Purchase Limit Help

In stock

Can we ship this to you? (US only)
{{restriction.odmShipCheckMessage}}
Specifications
Gauge:
10 Gauge
Make Model Fit:
Universal.Shotgun
Kit:
Component
Model Number:
Fine Chamber Hone
Restriction
Can we ship this to you? (US only)
{{restriction.odmShipCheckMessage}}
Description

Hundreds of abrasive "balls" mounted on a flexible shaft - the fastest, easiest way we've come across to clean and polish older barrels or put a mirror polish in new ones. For used barrels, the Medium-Coarse hone, followed by the Fine, removes rough and tight spots and brings the bore to a bright finish that you can see and feel . . . just run a patch through it before and after; the difference is amazing! We found too, that we could feel tight spots during honing and spend extra time on them until they were evened out. On new barrels, the Fine hone by itself will bring the factory finish up to a beautiful, mirror-bright finish that's a real customer pleaser. Easy to use: chuck in a variable speed electric drill; wet the hone with Flex Hone® oil; start the drill and insert the hone into the barrel from the breech end (if possible). As it cuts, a slurry of abrasive and oil develops to help speed the cutting action. Flex Hone® available (shown below) in sets and individual hones for 10, 12, 16 and 20 gauge barrels as well as .410 bore. Also, special-sized hones for 10, 12, 16, 20 gauge chambers and .410 bore. Instructions walk you through the steps for a perfect job. (You MUST use Flex Hone® oil - all other oils will destroy the abrasive "balls" and void our guarantee!) 750 RPM MAX. Avoid excess pressure.

View Flex-Hone PDF Here


SPECS: Flex Hone® for Barrels; 10, 12, 16, 20 ga., .410 bore. 33" (83.8cm) long in Med.-Coarse grit (red tip) or Fine grit (light blue tip). Flex Hone® for Chambers; 10, 12, 16, 20 ga., .410 bore 12" (6.5cm) long, fine grit (light blue only). Set includes Med.-Coarse & Fine barrel hones, Chamber hone & 1 qt. Flex Hone® oil, for 1 ga.



Medium grit is 180 grit silicon carbide and Fine grit is 800 grit aluminum oxide.


Please select a FFL Dealer

or
7 dealers near
Distance:
10miles
arrow-down
Sort by:
Nearest first
arrow-down
pin wrong
No dealers found

Please search by another zipcode to find the nearest dealer.

Close
Brownells Retail Store
Pin in
Clock
You must select required check box

Note:

Listed hours & fees are not guaranteed and subject to change. Please contact the dealer to confirm current hours & fees.
* Must accept required fields.
  • Pin in Brownells Featured Dealers

    Choosing a Brownells Featured Dealer is the fastest and easiest way to complete your purchase. Brownells Featured Dealers have agreed to perform FFL transfers on guns purchased online from Brownells. We have their necessary FFL information on file and your FFL order will ship directly to them once processed.

  • Pin in Standard Dealers

    Standard Dealers have not yet agreed to perform FFL transfers on guns purchased online from Brownells. If you choose a Standard Dealer, you are responsible for contacting that dealer and arranging for the dealer to submit a signed copy of an FFL and to give Brownells permission to ship the gun.

  • Pin in Not Available Dealers

    Not Available Dealers are dealers Brownells cannot ship guns to at this time. These dealers either do not meet our requirements for FFL transfers, or prefer to not perform transfers for guns purchased online from Brownells.

Switch view map
7 dealers near

You May Also Like

Right Badge OFF  
5 Stars

200

300

Customers Also Viewed

Right Badge OFF  
5 Stars

200

300