LITTLE CROW GUNWORKS, LLC. - Roll Pin Pusher for AR-15 style rifles

This tool made what can be a nerve racking task a breeze for someone who had never done it before but had heard the horror stories of doing it without it. Worth every penny.

adds class to building a lower instead of beating on the thing like a savage.

Purchased this roll pin hand press for installing / removing AR type mil spec trigger guards to avoid the dreaded hammer and punch method normally employed for this task. In short, looked over the included directions twice, mocked up the process once, lubed the threads on the press with light oil as suggested in other reviews and gave it a go. Installed the trigger guards detent pin, used the pilot guide pin included with the press and inserted a lightly greased roll pin into the pin hole, started the roll pin with a roll pin holder punch and finished the job with the press easy peasy and no issues. Very smooth and easy procedure if you think it through for a minute before using. Also, pro tip, cover the non-drive side of the press with painters tape or similar to keep from marring the lower receiver and poke a hole through the tape to allow the pilot guide pin to escape as the roll pin is pressed into the trigger guard.

One of the best AR tools i have. After building many ARs I always dreaded pounding in the trigger guard pin. This tool made it a piece of cake. I couldnt believe how easy it was.

After trying to drive a pin into it the old fashioned way I gave up and ordered this pin pusher. It made it a lot easier and ensured I didn't mar the finish on the receiver. Yes it's pricey but I intend to assemble a few of these so it will be worth it.