LYMAN - Qwik Spray Case Lube

I have used this spray lube for many years. It's easy to use but leaves a sticky residue that wipes off easily. I used to use the Lee lube when I first started reloading 20 years ago. The problem with lubes that require a pad and rolling cases one at a time is that it is VERY slow and tedious, and if too much is applied,it will dent cases and build up in the dies. This stuff does the job well and with the use of a loading block, all the cases can be lubed at the same time by lightly spraying up and down the loading block on both sides and then swabbing the insides of the necks with a q-tip sprayed with the lube. I have not had a stuck case in years, but it is a good practice to degrease the inside of the sizing die periodically - this will guarantee no stuck cases.

I much prefer this to hornady's one shot spray lube, which always seems to result in stuck cases for me. This works well, but does leave a sticky residue. Tumbling after sizing (which I hate) is pretty much a requirement, but I hate stuck cases in my dies much more. Very rarely do I get a case stuck when using this lube.