SLIDES WITH RMR CUT FOR GLOCK 19®

SLIDES WITH RMR CUT FOR GLOCK 19® Reviews & Ratings

Optic-Ready Enhanced Slide With Unique Ergonomic & Performance Upgrades


The Brownells RMR Slide for Glock® 19 Gen3 pistols is the ideal upgrade for your factory G19 or the perfect enhanced slide for a brand-new custom gun built on a compatible frame from another manufacturer. This slide features a pre-cut slot for easy, secure, low-profile mounting of a reflex red dot sight that fits the Trijicon RMR footprint. If you're not mounting a red dot at the moment, we've included a lightweight polymer cover plate to neatly fill the slot. Our RMR Slide comes with standard-height front and rear sights, which can serve as your primaries or as backup "iron" sights when paired with a red dot sight.



You can get your Brownells RMR Slide for Glock® 19 Gen3 with the standard solid top or with a "window" cutout up front that enhances air flow to cool the barrel - ideal for hard-working action competition pistols. If you have an upgraded barrel with a contrasting finish or a unique exterior pattern (fluting, spirals, flames, etc.) the window lets you show it off! Or install our ported barrel for Glock 19, and combustion gas venting from the barrel ports through the window will counteract muzzle rise and help you keep the sights on the target for subsequent shots. There's no need to install a bulky compensator on the muzzle, which means your new comped pistol will still fit standard holsters for the Glock® 19.


FEATURES

  • Fits Gen3 Glock® 19 pistols & clones
  • Built-in mounting slot for reflex sights with the Trijicon RMR footprint
  • Factory front/rear iron sights installed
  • Optic slot cover plate & recoil spring assembly also included
  • Machined from 416 stainless steel billet, black Nitride finish
  • Available with traditional Solid top or distinctive top Window cutout
  • RMR mounting holes are threaded 6-32 TPI


Each RMR Slide for Glock® starts life as a billet of 416 stainless steel that is machined to Glock® factory specifications inside, so it’ll accept factory or aftermarket barrels and internal "small" parts. Each slide comes with a tough, wear-resistant black Nitride finish. This slide fits standard Glock® factory G19 frames and compatible aftermarket frames.


On the sides at the rear, you'll find distinctive wide, shallow cocking serrations that give excellent "purchase" to rack the slide, plus a mirror set of serrations up front that aid in manipulating the slide to press-check the chamber. Both sets of serrations make it easy to manipulate your pistol's slide from any angle and in any position. And we'll admit it: these serrations just look cool, too!


Whether you're doing an ambitious "built from scratch" custom pistol or you're upgrading a factory Glock 19 for enhanced versatility, a Brownells slide is the perfect component for your project!

View Product
Write a review
Reviews Summary
The reviews present significant concerns with the SLIDES WITH RMR CUT FOR GLOCK 19®, primarily regarding reliability and fit. While some users appreciate the value and quality of construction, many express frustration over issues like light strikes and improper cycling. A notable group feels the product is best suited for casual use rather than self-defense situations.
What Reviewers Are Saying
Reliability Issues
58%
Numerous reviewers experienced malfunctioning issues, such as double discharges, light strikes, and trouble with cycling. Common complaints indicate that the slide does not reliably lock back or properly seat into battery, raising concerns about its suitability for self-defense.
Fit and Compatibility
50%
A number of reviewers struggled with fit-related concerns, including the slide's compatibility with various barrels and frames, as well as the absence of required recoil lugs and screws for optic mounting. Many noted that while the slide looks good, its fit leaves much to be desired.
Overall Quality and Value
42%
Despite the aforementioned issues, several users felt that the slide offered decent value for the price, especially for casual use. Some highlighted the build quality and finished appearance positively, expressing a willingness to continue using or recommending it for non-critical applications.
4
G17
Bought this to pair with an SCT frame. The backplate didnt fit over the sct frame, so i had to replace the backplate, then it slid on. Thats more due to the sct frame than the slide. The slide does not have raised lugs like the rmr footprint is supposed to, but an rmr optic still fits. Overall, for the price it makes for a decent range toy.
Would you recommend this? Yes, I would recommend to a friend