FALL BUILD FEST IS ON - Shop Exclusive Deals & Offers!
+ 12% Off Select AR15 Parts Use Code: ARBUILD12

FALL BUILD FEST IS ON - Shop Exclusive Deals & Offers!
+ 12% Off Select AR15 Parts Use Code: ARBUILD12

WEAPONS CARE SYSTEM PELLETS

WEAPONS CARE SYSTEM PELLETS Reviews & Ratings

Innovative and efficient system cleans rifle and handgun barrels with a minimum of effort and mess. Slip two felt pellets on the cleaning rod adapter, apply your favorite solvent and push through the bore to rapidly scrub out dirt and fouling. Pellets fit snugly to easily follow the rifling for fast, efficient cleaning; as you withdraw the rod, the front pellet falls off while the rear pellet polishes the bore. Lets you apply oil, cleaning solvents, J-B® Bore Cleaner or Moly Bore Paste easily with minimal mess.

Plain pellets are made from a highly absorbent, hardened felt


Super Intensive pellets also have interwoven brass fibers for even greater scrubbing action to quickly clean heavily fouled barrels. All require cleaning rod adapter. SPECS: Felt, white. 3/8' (9.5mm) long.


View Product
Write a review
Reviews Summary
The WEAPONS CARE SYSTEM PELLETS receive widespread praise for their effectiveness in cleaning gun barrels, with many users noting improved results compared to traditional cleaning methods. However, some users report challenges with size compatibility and product assembly. Overall, the combination of snug fit, ease of use, and superior cleaning capability makes these pellets a favored choice among firearm enthusiasts.
What Reviewers Are Saying
Effectiveness
85%
Many reviews highlight the effectiveness of the cleaning pellets in removing fouling and residues from various calibers. Users report their success in achieving cleaner barrels and improved shooting performance, solidifying the pellets’ reputation as a top-tier cleaning solution.
Ease of Use
75%
Users often laud the ease of using the WEAPONS CARE SYSTEM PELLETS compared to traditional cleaning patches. The system’s design allows for a more efficient cleaning process with reduced setup time, significantly cutting down the overall cleaning time required.
Compatibility Issues
30%
Some reviewers encounter compatibility issues, especially with certain calibers where the pellets are reported to be too large or difficult to use effectively. This has led to frustration, particularly when trying to clean tighter bores or using specific cleaning rods.
Quality Control
20%
Several reviews express concerns regarding quality control, specifically regarding missing items in orders. Customers noted discrepancies in the advertised count of pellets versus what they actually received, raising issues about the reliability of product packaging and shipping.
Product Innovations
15%
Reviewers appreciate innovative solutions, such as using ‘weed whacker’ line to pull the pellets through the barrel, demonstrating creative problem-solving to enhance the cleaning process. Such innovations may contribute to an even better user experience.
2
They clean well, only if…
These pellets do a great job cleaning out barrels, if you can keep it inside the barrel. I tried the 9.5mm Super Intensive on a Glock, 1911, and Taurus barrel. One with a 45-degree crown, another with a 11-degree crown, and a flat crown. The challenge is pulling the pellet back into the barrel once it has been pushed out the muzzle. The dang thing will not come back in. Please note that this review is for the 9.5mm Super Intensive Pellets. The pellet distorts in such a way that it will not fit the muzzle. Picture this. You thread a pellet onto the VFG 8-32 thread adapter. Kroil the pellet, apply some J-B Bore Compound, push it through the chamber down the bore and out the muzzle. Typically, you would be able to pull it back through the muzzle so that you can get the polishing done, but noooooo! Once you get that little pellet out the muzzle, you have to disassemble the adapter, pull out the rod, reassemble the pellet to the adapter, and go again. And all this while having oil and compound on your fingers. SO FRUSTRATING! I thought I would be able to perform the same action as one does when using a bore brush. I had to be very, very careful not to push the pellet all the way out so that I could get the push pull action going. Oh, and good luck trying to hold the barrel in one hand while pushing the rod with the other, not gonna happen. These pellets are a real tight fit, which is great. I had to use my 4-inch drill press vise to hold the barrels. But, as I stated, they do a great job polishing the barrels. It’s just the disassembly reassembly thing that turns me away from these pellets. Imagine if you had to remove the bore brush from the rod every single time you pushed it down the bore once and out the muzzle. You would only be cleaning in one direction. I hope this helped you decide. Good luck, stay safe.
2
does the job, but...
...why isn't it made of brass? see that knurled nut that holds the pellets in place? it's going straight into your bore if you're not careful. The pellet holders for the Dewey-brand cleaning rods are made of brass.
2
Overboxed and undercounted
The product itself is great with Kroil and JB Bore paste for older bores in need of a good cleaning but my order of Koil and JB, pellets, and pellet adapter was placed in a box 4 times the size needed to ship and still loose in the box when received. I'd called about the price of shipping prior to order thinking it was a bit high for a small order but was told this size was needed to ship. The final irritation was with the pricey imported German .338 to 8mm "Super Intensive Pellets" advertised and billed as a package of 50 but only containing 38 when received. After looking closer at the actual manufacturer's label on the box; I should have clicked on Brownells item picture to enlarge, I read a count of "approx. 40 pcs." Initial call about shipping took 45 minutes; similar to insurance company customer service, two subsequent calls after receipt of order only resulted in busy signals and an unreturned message. Brownells obviously is very busy but they won't be needing any more of my little bit of business.
2
357-9mm
Does not fit in a 357 cal-9mm barrel. Too big. had to fight to get it in half way