ULTIMATE TRIMMER & PLATFORM KIT Reviews & Ratings

SINCLAIR STAINLESS ULTIMATE TRIMMER - The legendary L.E. Wilson Case Trimmer has just gotten better. Exclusive to Sinclair International, the L.E. Wilson Case Trimmer is now offered in a Stainless Steel model. We’ve paired the most accurate trimmer in the world with our Sinclair Micrometer head to create the Sinclair Stainless Ultimate Trimmer. The L.E. Wilson Case Trimmer aligns and holds your cases square to the cutter during the trim process. This results in a virtually identical trim length for each case. It is accomplished with L.E. Wilson’s unique case holder system which holds the case by the body taper. The trimmer case holder, cutter housing, and micrometer adjustment unit sit in perfect alignment. No pilots or collets are utilized which could influence the trim results negatively. Now in stainless steel, the L.E. Wilson Trimmer is built to last for a lifetime of use. Our Sinclair Micrometer head allows the reloader to easily adjust trim length in increments of .001" with an adjustment length of over 2". Our micrometer reads in “actual” case length, making it the most pleasurable micro trimmer to work with. Determine your trim length, dial to the exact length on the micrometer, and you’re ready – it’s that simple. The micrometer features crisp, easy-to-read engravings and may be locked in place when set. Easily accommodates cases from 22 Hornet to 416 Rigby. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (part number WX11) is necessary. Completing the Sinclair Stainless Ultimate Trimmer is our Sinclair Mounting Stand with Shark Fin Clamp. This system makes easy work of installing and removing your trimmer case holder in a smooth “swing-arm” motion. The Shark Fin trimmer clamp secures the case head firmly against the micrometer adjustment head for a quick and accurate, chatter-free trim. * Trimmer Case Holders and accessories sold separately.

PLATFORM - The idea for this platform originated from a writer/customer of ours. The platform is a mounting board for the L.E. Wilson trimmer series that provides storage space for nine (9) case holders and a tapping block for knocking the cases out of the holder. The polyethylene platform has rubber feet, but most of us prefer it c-clamped to the bench.

View Product

Write a review

3 Stars

1 Stars

Reviews Summary

The ULTIMATE TRIMMER & PLATFORM KIT impresses with its exceptional build quality and precise trimming capabilities, drawing praise for its ease of use and the ability to achieve consistent lengths. However, some users experienced issues with the micrometer, leading to inconsistent results at times. Overall, it's seen as a worthwhile investment for precision reloading.

What Reviewers Are Saying

Product Quality

73%

Reviewers consistently highlight the high-quality machining and construction of the trimmer. The materials used are deemed superior compared to other brands, and the alignment and stability during operation are often commended. Many believe the product represents excellent value for the quality offered.

Ease of Use

68%

Many users find the trimmer straightforward to set up and operate, appreciating features like the micrometer adjustments and the design that facilitates quick trimming. The ergonomic design contributes to a comfortable user experience, particularly when trimming multiple cases.

Micrometer Accuracy

60%

While several reviewers praise the micrometer's functionality, others report inconsistency in accuracy, noting 'drift' when adjustments are made. This has led to mixed experiences regarding precision, with some users recommending swapping the installed micrometer for a higher-quality alternative.

Performance Consistency

55%

Reviewers indicate that once properly zeroed, the trimmer performs well, delivering consistent case lengths. However, some users express concerns over maintaining accuracy across different calibers, suggesting a learning curve in achieving the desired results.

Value for Money

50%

The price point of the trimmer is discussed extensively, with many users noting that the investment is justified given the quality and performance. However, some hesitate initially due to the cost but find it worthwhile after experiencing the product's capabilities.

User Support & Issues

38%

A few users encountered issues and had mixed experiences with customer support regarding micrometer problems and product alignment, indicating possible room for improvement in resolving user concerns effectively.

Sort by Filter by rating

Not made entirely by LE WIlson

I got this thinking I was buying a product made entirely by L.E. Wilson. I was wrong. Although the trimmer base, rods, bearing, hold down and cutter are genuine Wilson, the micrometer is installed by Sinclair. I use precision tools at my job and can say with certainty that micrometer on this unit is trash. I replaced mine with a Wilson micrometer and the difference is night and day - there's no looseness of any kind in the Wilson, whereas the Sinclair mic has a good .010" of play in it, causing it to sit cocked in the bore when the thumbscrew is tightened. When I contacted customer support, I was told this not a problem (even though it causes the trimmer to not cut perfectly square). I called Wilson and they told me this is a common issue with Sinclair Ultimate models, but since this isn't their micrometer, they couldn't help me. I eventually purchased the Wilson micrometer and my problem is rectified. Do yourself a favor and get the genuine Wilson micrometer and save yourself the headaches I've had.

A mixed bag.

The shell holders measure ~.97", the bearing through which the cutter passes is only ~.95". The shell holder and tool center do not line up! I contacted Sinclair tech support who confirmed what I'm seeing and then referred me to Wilson tech support. I haven't heard from Wilson yet. For case trimming the misalignment is of no real consequence. However for reaming, chamfering or primer pocket work the tool is useless as configured. In my opinion, the Wilson method of holding the cases is superior to everything else. My solution... have a new bearing machined that is of the correct dimension and have it bored to fit Forster cutters and accessories. The best of the two best!

Great for Rifle - Horrible for Pistol

Saw the videos and read about using this trimmer. No problem. Put the case into the holder, tap it, set it on the rails, and with the micrometer already adjusted - trim. That's how it is for a rifle. Put a .45 or a 9mm in there. Now the part they don't tell you till you order the holder. "Drive the case in with a mallet OR AN ARBOR PRESS, trim it and then drive it back out. Will probably have to use a wooden dowel". You have got to be kidding me. If you are trimming pistol this is NOT the trimmer you want.