Veterans Day Saving Are On! - Take 17.76% Off Almost Everything
Use Code: HONOR1776

24 Hour Flash Sale - 10% Off Regular Priced Ammo w/ Code: AMMO10

AR-15/M16 SINGLE SHOT MAGAZINE FOLLOWER Reviews & Ratings

If you are using the longer, heavier bullets in your AR-15, then you need a Sinclair AR-15 Single Shot Follower. The longer, heavier bullets are normally loaded longer than magazine length. The Sinclair AR-15 Single Shot Follower positions the 223 Remington cartridge loaded with longer bullets correctly for smooth feeding into the chamber. Once a round is fired, the bolt retracts and locks behind the follower in the empty/loading position. No need to take your magazine apart! It takes only a few seconds to install the Sinclair Follower on top of the existing follower. It can be removed just as quickly. This follower addresses many of the problems with existing single shot followers on the market. The satin finished anodized aluminum wears better than the plastic followers and is easily noticeable in the magazine. Works perfectly in GI metal magazines and Brownell magazines. Will not work in any of the inexpensive, plastic magazines we tested. Will work with 450 SOCOM and 450 Bushmaster.

See all of our AR15s and AR15 parts here.

View Product

Write a review

3 Stars

Reviews Summary

The AR-15/M16 single shot magazine follower has mixed reviews. Users appreciate its function in some standard metal magazines but report issues like jamming, improper fit in polymer magazines, and wear over time. While it works for single loading, many find that it fails to consistently chamber rounds, leading to frustration among competitive shooters.

What Reviewers Are Saying

Functionality

55%

Many users appreciate the follower's ability to work well in specified standard metal magazines for single loading. However, numerous reports of frequent jams and inconsistent performance indicate that while it serves some users' needs, it does not meet the expectations of others, especially competitive shooters.

Compatibility

65%

Compatibility issues are prevalent in reviews, with numerous users noting that the follower does not fit well in popular polymer magazines like ProMag, Magpul, or DPMS. This lack of clear compatibility specifications leads to dissatisfaction among customers who expect broader usability with various magazine types.

Wear and Durability

45%

A significant concern raised by reviewers is durability, with several stating that the follower wore out quickly, losing its ability to properly hold the bolt open after minimal use. This indicates that while it may initially function well, longevity is a critical flaw for many users.

User Experience

50%

Users express frustration with the performance of the follower during competitive settings, where consistent loading and chambering are crucial. Several competitors found themselves tinkering with the product in hopes of improvement, leading to an overall negative user experience for a significant portion of reviewers.

Installation Issues

30%

Some customers faced challenges during installation, including needing to modify magazines or adjust follower placement. This added complexity detracted from the overall ease of use, which is a point of concern for potential buyers looking for straightforward installation.

Sort by Filter by rating

Make it from Delrin

Does not lock bolt open every time BCG gouges the follower Bought one years ago from Sinclair that is made from Delrin. Still works well I'll buy a Bob Sled next time