Great stock carving tool
Perfect for doing a nice consistent job on a wood stock, especially if you want to avoid all the Dremel gouging slips and mistakes. I used it primarily to open the barrel channel but it can be used anywhere you want to remove wood in a controlled and precise way. Great investment!
Would you recommend this?
Yes, I would recommend to a friend
inletting scraper
Initial use of the Fisher scraper indicates that with a little patience the tool should be a real winner.
Would you recommend this?
Yes, I would recommend to a friend
Great product
Very sharp. Easy to use accurately for Inletting purposes
Better than hoped for!
I was shopping for a drawknife type profiler. When I discovered they are no longer available, I searched and found the Jerry Fisher scrapers. They are excellent! I re-profiled a 25 year-old 338 RUM Rem 700 BDL LH and found the tool very manipulable.
Excellent
Excellent
Scraper
This one works good, would recommend for all stock work.
Jerry Fisher Scrapers
I have made many different scrapers over my 50 year career and I can't really improve on Fisher scrapers of any shape or size. Quick to sharpen and have a very long life. Great Value. Steve Heilmann
SPECTACULAR PRODUCT
First ..I am a first time user and a first time maker of a fore end for a Schutzen fore end. I started out with a 3/4 " burr placed in a drill press to set the initial path of the burr . I found the that I would have to set the fore end piece in a drill press vice so that the wood would slide in the vice. I also the found that I even had to tip the piece to engage the burr into the wood (English Walnut) This at least, set the path for the beginning of the inletting for a tapered barrel. (swamped barrel) After taking a bounty paper towel (no interest...just love them )I was able to take the inletting black, also from Brownells (I think the gold would have been too light ..I am 70 years old so....)Coating the barrel with the black and the spinning it into the the new started barrel grouve I found that this scraper while just removing the highlighted black area ...many many times produced a barrel grouve inlett that was not only perfect but put my inlet actually a little low, Perfect, now I could sand or scrape off to make the top surface perfect with the appropriate depth. This was great because I lost control of the tool (my error) the top surface was then perfect. I purchased the other barrel inletting tools in anticapation of problems...don't bother...just buy the scraper...in fact buy them both ...large and small. I only purchased the small ...I could have used the large in the swamped barrel but I managed to do fine. I do not have a financial interest in this company , but I wish I did. I hope this may be beneficial to you in your inletting. Bill
Excellent tool - worth the money.
I found this scraper to be a first class tool for bedding a shotgun barrel. Simple to use, sharp and effective. Did the complete job without need for resharpening. Nice to find a tool that does the job so well and is such a pleasure to use.
It’s ok
All products sold by brownells have been top quality
