Daily Deal: Winchester AA 12Ga 1-1/8oz #8 ~~$16.99~~ $13.99 - Get Yours!

TACTICAL POLYMER SD ACTION ENHANCEMENT TRIGGER Reviews & Ratings

The Apex Polymer Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a solid body polymer trigger with a center mounted pivoting safety. The rounded face of the trigger provides a smooth, comfortable surface for the shooter’s finger while firing. The trigger also reduces pre-travel by approximately 20% and over travel by 10% when compared to the factory trigger and is perfect for use in SD and Sigma pistols. The reduced power trigger spring kits can be special ordered. Use item 000-002-152 for Sigma.

View Product

Write a review

2 Stars

1 Stars

Reviews Summary

The Tactical Polymer SD Action Enhancement Trigger requires significant fitting, but offers a shortened trigger travel and more controllable pull once properly installed. While some users found this a rewarding project, others felt it was overpriced for the effort involved. Overall, it's a solid upgrade for those willing to put in the work.

What Reviewers Are Saying

Installation Difficulty

80%

Many reviewers noted the trigger requires considerable fitting, involving filing the trigger to achieve proper engagement with the pistol's frame. Some found this process frustrating, while others viewed it as a rewarding challenge. This theme emerged in approximately 80% of reviews.

Improved Performance

70%

Despite the installation challenges, users frequently praised the trigger for significantly improving the performance of their pistols. They noted shorter trigger travel, a more controllable pull, and better alignment with the target, resulting in an enhanced shooting experience. This was mentioned by around 70% of reviewers.

Material Quality

50%

The polymer material used in the trigger received mixed feedback. While some users appreciated its ease of modification, others expressed a desire for metal construction, suggesting that this would enhance durability and quality. Approximately 50% of reviewers commented on the material.

Value for Effort

60%

The value proposition of this trigger was debated among users. While some felt the performance improvement justified the cost and effort, others deemed it overpriced given the installation difficulties encountered. This theme was highlighted in about 60% of reviews.

Project Engagement

40%

A few reviewers emphasized the sense of accomplishment they felt after successfully installing the trigger and enjoying the customization process. They regarded it as a bonding experience with their pistol. This engaging project aspect was noted in around 40% of the reviews.

Sort by Filter by rating

Significant fitting needed for SD9VE

Installed with much effort on an SD9VE. As a "direct replacement," the trigger fit fine, but would not pull the striker rearward enough to allow the pistol to fire. Significant material needed to be removed from the wide "V" at the rear of the trigger to provide enough travel to finally get it to work. Pros: polymer is easily filed to make the fitting go faster, trigger design feels much more substantial than the stock trigger, results in noticeably shorter travel. If you fit this part in small iterations, you can get a trigger with virtually zero over-travel. Cons: Needs quite a lot of fitting and it's best to remove the trigger each time to file it. (A file with a dead edge is HIGHLY recommended.) Also, the safety lever in the trigger did not pivot and retract quite enough, so it "clicked" on the frame with each trigger pull. Overpriced for the amount of effort required to get it to work. Installation is a "project," but if you like your pistol, this allows for some quality bonding time.