Great Value - Great Results
I have been reloading for over 55 years, used about every brand name of dies made. Some are better than others, but nobody beats the value from Lee. I picked up this set of 6mm ARC dies to try a new to me caliber. They work great, as nearly all Lee products do. I only wish the Factory Crimp Die came with the set, as I use them for ALL my semi-auto cartridges.
Would you recommend this?
Yes, I would recommend to a friend
Lee dies
Lee dies do the same job just as well as the other brands, but at a fraction of the cost. I have 5 different calibers and have had no problems with any. Just make sure you clean them before using.
Would you recommend this?
Yes, I would recommend to a friend
Lee Die Set
So far so good, I bought the set mostly for the factory crimp die. I used the seating die with the added micrometer and it worked quite well. The added micrometer with the seater die is a big bonus. I am not sure how the sizing die will work but at this point I am happy with the die set.
Very good die set
Lee Precision dies, when used correctly, provide fantastic loads with the consistency of "match grade" commercial ammo, when other steps in the reloading process are taken. My hunting rifles are not heavy barrel, fluted etc. Standard tapered hunters. I do have glass bedding and float the barrel. So there's the conditions for me. In single stage loading my rounds with Lee Precision Dies and comparing the groups between those and factory box ammo, the factory loads gave 5 round groups averaging 1.75 MOA. My handloads dropped a full 1 MOA, to .75MOA at 100 yards. Bench rested, sand bagged. I trim all casing to length and verify the bullet length on all single stage loads. Progressive loads get less scrutiny (still trim cases, check length and grains every 7th round) and the MOA rolls out to about 1.25 ~ MOA at 100 yards. Great set of dies, only brand I use for my purposes.
These dies are easy to use,
These dies are very easy to use, just read instrurtions and go.
