Pacesetter
The decapping pin broke after punching out only a fw caps,very disappointed, I am now not using the lee universal that I bought because the pin bent this mak a total of 3 1 from my 308,1 from 30 06, and finally 1 from my 7mm I wonder if lee pin makers are hardening the pins to hard making them brittle?
Buy at own risk
This is the worst die set that I have ever used. It was producing ammunition that would not chamber, so I checked concentricity using a Sinclair gauge. The lee full length sizing die was producing sized cases that were up to .020 out of round at the neck. I floated the die body and shellplate, but the problem persisted. I removed the decap/neck sizer and found the the die was sizing to .003 without the neck sizer. The neck sizer was not bent, meaning that the die body must have been drilled and tapped off center for the neck expander retaining nut. The bottom line is that ammunition produced with these dies will be so out of round that it may not even chamber.
DO NOT BUY
horrible. the de-priming/sizing die falls apart, nearly impossible to put together. and even with the "Lee recommended" lube, it is still really rough. its only $30 so its a learning experience. just don't buy it.
Not as advertised
Product description says it "includes the factory crimp die". I assure you, it does not.
