Bedding pillars
Perfect dimension and solid craftsmanship! If ya are needing a solid post for a bedding job, this is what you need!! As always, Brownells delivered a quality product!!
Pillars
They look similar to the one I made today. If you are bedding a stock you will need some.
Would you recommend this?
Yes, I would recommend to a friend
GREAT!
Works great.Brownells have been suppling these for many years as they work!.
Would you recommend this?
Yes, I would recommend to a friend
using them again
Why try something else when these work great.
Great Pillars for heavy target stocks
I have used these pillars not in 5 Richards Micro Fit target stocks. They require a stock with a fair amount of material around them since they require a hole size of .575". They need to be cut to length which a lathe is the best way. I match the radius of them to the action that will sit on them and cut length so that they are about .030" taller than the stock bed so the action is resting on them and they are recessed about a 1/4" on the under side of the stock so the screws are flush or recessed in in the stock. They are anchored using stock bedding epoxy. Once in place test fit and bed the action to the stock. Some photos attached. They make very solid stock to action attachment! Photos are of a stock in progress and bedding epoxy has not been cleaned up yet
Solid
Drill holes. Measure length cut them down.( I finish ground mine on a stone and polished them the same.) Devcon them in and let sit. Worked Great! 5 years afraid to try pillar bedding and I finally tried it out. So glad I did. Easy process. Very solid and looks great! Could not be happier with this Brownells product!
