Excellent upgrade
This is an excellent upgrade to the R CBS universal trimmer
I've owned this trimmer for 10 years and have the original cutter on it.
This cutter is a real time saver and very repetitive when in process.
Would you recommend this?
Yes, I would recommend to a friend
Makes trimming so easy and precise
I’ve been using these RCBS case trimmers for 6 years, and they are so easy and precise. It does take a little more time to adjust them to cut precisely, but it’s well worth it!
Would you recommend this?
Yes, I would recommend to a friend
Great Addition to my Bench
I started prepping allot of .223 brass this year and trimming was always the most cumbersome task. The 3-way cutter made that job much easier and quicker. I have it installed on my Hornady Cam Lock Trimmer with the Power Adapter. I can make quick work of a few hundred cases and they're all trimmed ad chamfered precisely the same. I would highly recommend this cutter if you're going to be prepping allot of brass or if you have allot of calibers with the same bullet diameter.
Excellent Product
This product produces excellent trimming. Very easily installed and easy to clean.
Great time saver
This tool makes a tedious job almost enjoyable. It took about 5 minutes to set up using the supplied instructions, and does a great job of trimming, chamfering and deburring case necks all in one step. As an added bonus, because there is no "flash" around the necks after the cut, the cases just pop right off. I wish I had found this 35 years ago when I started reloading. On top of that, RCBS service is awesome. I had an older model cutter that does not allow the cutting head to be removed. After over 30 years, it was so dull it just wouldn't cut. I e-mailed RCBS asking if I could purchase a replacement cutter. They sent me a new shaft and removable cutter - FREE! That kind of service keeps me coming back.
Outstanding Idea!
I use this on the motorized Trim Pro and it significantly reduces the prep time spent on each case. This is a great idea and works great even if you only neck-size your cases.
Excellent
This Could be one of the best time saving tools I have in brass prep. Works precisely as advertised and very easy to replace the standard cutting head and set up. Trim length is adjusted as normal. Inside deburring is accomplished by loosening the pilot and moving in and out to desired cut - then lock in place. Outside chamfer is done by loosening set screw and turning the knob to lower the blade onto the outside rim of the case. Took less than 4-5 minutes to figure out and set up for the first time and every case comes out perfect. Used with my drill on the trim pro shaft, I can easily complete about 8- 10 rounds per minute
Not meant for electric Trim Pro
I have a Trim Pro 2 (powered version.) When contacted, RCBS says it is not meant for their power version. I find that with care and extra attention, it will work (cases tend to fly across the room when withdrawing the cutting head and the torque can spin the case even when "securely" locked in position.) They advise the head may wear out more quickly. As stated, with care, it seems to do a good job. I use for .223 and .30 cal. RCBS support is great, a real positive!
