Good powder
Good powder for reloading shotgun shells
My new favorite powder
This is my new favorite powder for low and mid weight 12 gauge loads. Easy recoil and burns clean.
Would you recommend this?
Yes, I would recommend to a friend
Versatile fast burning powder... great for lighter loads
It's hard to find a powder for 1oz & lighter 12ga loads... Perfect Pattern answers that call.. reduce your recoil & maintain an effective pattern on the skeet field...
Would you recommend this?
Yes, I would recommend to a friend
Great products at great prices
This is a great powder but you need to use a 3/4 oz wad with a 7/8 oz charge.
Perfect for tapered case 1oz lods
Another low volume powder similar to Titegroup/High Gun. Works well with AA HS hulls and DRA12 Pink (Red) 1oz loads and Nitro hulls and CB8118 1oz loads. MEC bushings 17 thru 20 are helpful to have for these loads.
Would you recommend this?
Yes, I would recommend to a friend
One of my favorites
Clean and complete ignition. Have used in Remington gun club, federal top gun, Winchester AA , Winchester light target and estate with great success . 1 and 7/8 oz. Loads for sporting clays with no problems although wad selection and components do vary.
Perfect Pattern
Burns very clean, I do have to use a wad for an 1/8 lighter shot to have the crimp come out good. Doing this is in the Hodgdon data.
Decent powder
Clean burning with lighter recoil. I did have dished in crimps but instead of changing wads I just adjusted how far I seat my wad. Very easy to do from watching a YouTube video. I made 1 oz loads with a claybuster CB8100 TGT12 clone wads in a Rem hull.
Would you recommend this?
Yes, I would recommend to a friend
Low volume
I shoot a 1 oz. load and use a 7/8 wad to make up the difference in volume, and a 3/4 wad for 7/8 load when I shoot skeet in a Remington hull.
Would you recommend this?
Yes, I would recommend to a friend
Super low volume
Getting a little desperate for powder and this was available at a decent price. The volume this powder takes is roughly 1/3 the volume of any other powder I have used (Clays, Red Dot, Green Dot, WSR).
I had to order a whole new set of MEC powder bushings. Using a size 19 bushing where I used 30-31 to get the same performance. Leaves a lot of extra room in the shell when you are filling 1 oz loads. Have yet to use the loads for clays...