Great products Great price
finally switched to mandrel for neck/throat sizing
Would you recommend this?
Yes, I would recommend to a friend
Dry lube
As expected
Dry lube works great
This is my first time using any dry lube products and this Imperial dry lube works great. So much easier when doing just neck sizing, no more mess and dented shoulders from too much oil lubes. I'll be using a lot more of this. Matter of fact, I've already ordered more.
works great
perfect for rifle necks and straight wall cases in carbide dies ...
Great Neck Lube
This is designed as a neck lubricant. You will not like it on case bodies. Best applied with Imperial spherical ceramic media. The application media comes with some neck lubricant included but this will recharge the media when needed.
Amazing product
I found this after struggling with other lubes. I reload .204 Ruger and found on occasion my funnel would block due to excessive liquid-based lube still inside the case necks. This product removes that event all together!! No more brushing out lube required. I could tumble the cases again after neck sizing I guess. Simply dip the case into the powder upto the shoulder, and shake out the excess - that's it!! No brushes, or lube pad required. The dry graphite powder does not clog up the case and die (but does coat the ball a little bit), and I find I only need to lube every 2nd or 3rd case. I use standard Redding neck sizing dies. I do remove storage oil from the neck sizing die stem etc before I begin, so as not to get a big blob of graphite goo on the stem and expander ball. Any graphite powder remaining on the inside of the neck does not interfer with powder loads going into the case, and may also persist, making bullet seating easier than it already is? Combined with the Imperial sizing wax, I have never used my messy lube pad and liquid-based lubes since. The pad would soak up a lot of lube and I found it to be very wasteful. A light coating of graphite powder inside the neck is all that is needed. This small pot will last me decades.
Best Lube for Case Necks
I started using this product a few months ago because I was tired of the mess associated with the aersol spray lubes. I use this lube on the inside of my case necks only. Simply dip the case neck into the media and you're done. Note: This is a two step process becuase I use Hornady's Unique Case Lube on the outer surface of my cases.
Worthless
Bought to try on new pistol brass going into Dillon 550 so it would not stick on expander. All this mess does is stick to outside of case and get on your fingers. Worthless. Get yourself some Hornady Case Lube instead.
