Summer Cleanout Sale!
Huge Savings On 2000+ Items From 200+ Brands - SHOP NOW

Daily Deal: Eylar 250th USA Rifle Case w/ RAGAR Foam ~~$259.99~~ $179.99- Get Yours!

HANDALL BEAVERTAIL GRIP SLEEVES Reviews & Ratings

The new grip sleeves are designed to fit specific polymer pistols now on the market. The Beavertail Grip Sleeve line has been engineered with models for precision fits on specific firearms. The initial offerings in this series has sleeves designed for perfect fits on three sizes of polymer firearms. While each sleeve has been created for a precise fit on specific polymer framed firearms, they also alternatively fit many other similarly sized firearms with a fully functional and aesthetic fit. The Beavertail Grip Sleeves are installed by slipping them over the frame of the firearm until seated into perfect position. Once installed, the HandALL sleeve provides a single finger groove for instinctive handling of the firearm. The finger groove leads into a gentle palm swell that has been carefully designed to fit naturally in the hand. The beavertail built into the grip sleeve rises high along the backstrap of the frame giving full rubber contact with the hand allowing a higher hand-placement on the grip without the fear of the slide biting the skin between the thumb and the trigger finger. In addition to protection and comfort, the beavertail also cushions the hand during recoil. The HandALL is built from a long-lasting durable thermoplastic elastomer compound. This rubber ages very gracefully and keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage. The grip sleeve is textured with Hogue’s familiar Cobblestone™ texture, a series of small circular bumps that provide an efficient non-slip, non-irritating grip on the rubber.

View Product

Write a review

3 Stars

2 Stars

1 Stars

Reviews Summary

The HANDALL BEAVERTAIL GRIP SLEEVES improve grip comfort and control for various gun models, but installation can be challenging and inconsistent. Many users found success with heating techniques, while others faced difficulties. While the grip enhancement is praised, some users noted poor fitting or installation complications, leading to mixed experiences overall.

What Reviewers Are Saying

Installation Experience

60%

A frequent topic of discussion is the installation process, which many reviewers found challenging. Some users successfully used techniques like heating the grip in hot water or using Windex as a lubricant to ease application, while others struggled with the provided instructions and had difficulty getting the grip on their firearms.

Fit and Comfort Improvement

75%

Many reviewers praised the grip sleeve for enhancing the comfort and fit of their firearms. Users noted that the added palm swell transforms the feel significantly, improving handling for larger hands and enhancing accuracy during shooting.

Product Reliability

55%

The reliability of the grip's fit once installed is a common theme. Most users reported that the grip remains securely in place after application, providing a stable shooting experience. However, a few reviewers expressed dissatisfaction with the fit on certain models, suggesting variability in product quality.

Value for Money

50%

Reviewers generally considered the HANDALL BEAVERTAIL GRIP SLEEVES a worthwhile investment, highlighting the comfort and accuracy improvements they deliver, often describing them as must-haves for carry and competition use. However, some voiced that the struggle to install could detract from the perceived value.

Support and Resources

45%

Many users did well by consulting external resources like YouTube videos, indicating that access to helpful installation guides significantly impacts user experience. Users suggested that these resources should be more prominently referenced during the purchasing process to assist with application challenges.

Sort by Filter by rating

Grips for Taurus G2 PT111

Perfect fit now I can have a true firm grip on my G2.

by Jerry Morales on February 16, 2024

Verified Purchase

Was this review helpful? 0

P 365 Hogue Grip

Exactly what I was looking for to increase the grip size on my p365. Went right on in about 5 minutes with a little heat from hair dryer. No windex or plastic strips needed to install.

Improved grip. Good fit.

I put this on my S&W Shield and it now fits my hand much better. I was hesitant to order because I had one years ago that was a poor fit and I ended up throwing it away. Not so with this one. It is a little bit of work to install because of the snug fir but well worth it. Added just enough palm swell to really improve the fit and feel of the Shield.

Good improvement

Easy to install on Glock 42 - read the directions, put in hot water and use Windex. Cutting the shoehorn pieces out of the package is not helpful. Lots better control for improved accuracy on rapid shot strings. Must have for carry and competition.

MAKES A GLOCK 43 A BETTER CONCEAL CARRY

I HAVE LARGER HANDS, AND AFTER CARRYING A GLOCK 22, .40 CAL., AS A DUTY WEAPON, THE 43 OBVIOUSLY FELT "SMALL." I DID CARRY A GLOCK 27, ALSO A .40 CAL., UNTIL I RETIRED, AND DECIDED THAT I WANTED A WEAPON THAT WOULD BE EASIER TO CONCEAL THAN THE MODEL 27. I LIKED THE 43, BUT FOUND THAT MY HAND WOULDN'T ALWAYS GRIP THE GUN HIGH ENOUGH. A FRIEND SAID I SHOULD TRY THE HOGUE BEAVERTAIL. AFTER INSTALLING THIS GRIP ADAPTOR, MY HAND SEEMS TO AUTOMATICALLY POSITION ITSELF IN THE PERFECT SPOT. I'M GLAD MY FRIEND TOLD ME TO HEAT UP SOME WATER IN THE MICROWAVE, AND LET THE GRIP SOFTEN IN THE HOT WATER BEFORE TRYING TO PUT THEM ON THE GUN! ONCE YOU HAVE THEM SEATED IN THE RIGHT SPOT, YOU ARE DONE. NO WORRIES ABOUT THEM SHIFTING OR SLIDING. A GREAT ADDITION TO A GREAT GUN.

Great for Polymer Kahrs

I put this on a Kahr P9, and it really improves the feel of the pistol. It has stayed in position so far, and hasn't shown the tendency to rotate on the grip like the HandAll does. As other reviewers have noted, heating it up with hot water or a hair dryer makes installation much easier.

Easy way to install

Hogue has a video on youtube that shows using plastic strips cut from the package to help slip it on. Works perfectly with very little effort. I have a large hand. The slight palm swells and beavertail make a big difference in feel.

Great addition to the shield 45

Took about 5 minutes to install. Place it in boiling water for about 30 seconds, then inch it up the factory grip. Nice upgrade. Much more comfortable than factory grip.

Makes a big difference on an LC9s

Although designed for the M&P Shield, this grip also fits a Ruger LC9 and LC9s perfectly. It makes a big difference on the LC9s. Fills my hand much better. Check out Hogue's youtube video on how to install using window cleaner. It makes the task much easier.

Good grips but hard to install

Now that I have them on, they are nice. This was one of the hardest things to install on a Glock 26. It took several attempts and the first grip ripped.

by Brad N. on May 27, 2023

Verified Purchase

Was this review helpful? 0