GUN-KOTE™ OVEN CURE, GUN FINISH Reviews & Ratings

The world-famous, ultra-thin, friction-reducing coating that lasts and lasts can now be applied to any clean, pre-heated metal part in as little as 2 hours. You get the quality of genuine GUN-KOTE backed by Brownells no-hassle, complete satisfaction guarantee; an unbeatable combination!

Now you can easily apply the self-lubricating benefits of molybdenum disulfide to alloy steel, stainless steel, brass and aluminum, even properly prepared nickel plating, in just minutes. Prepare, clean and pre-heat your part to 100°, spray on Brownells GUN-KOTE and allow the part to dry. Bake the part in an oven at 325° for one hour and you’re done. You’ve protected the metal parts of your valuable firearm from rust, corrosion, and scratches with a beautiful finish that will wear for years and help keep your gun looking just like new.

Brownells GUN-KOTE is a durable, second-generation epoxy, thermo-set resin finish that will not break down, peel or dissolve. In fact, once it’s applied, the only way to remove Brownells GUN-KOTE is to abrasive blast the part. It is resistant to all known gun solvents and thinners. Each coat is approximately .0004" thick so Brownells GUN-KOTE can be used on both internal and external parts where a close-tolerance fit is required without having to worry about interference. This makes Brownells GUN-KOTE the perfect, maintenance-free coating for handgun slides and frames, shotgun receivers and magazine tubes, rifle actions and bolts, anywhere you need an ultra-thin, self-lubricating, permanent coating that protects and wears like crazy.

Liquid - 8 fl. oz. (237 mL).

THINNER NOT REQUIRED

View Product

Write a review

Reviews Summary

Customers often rave about Gun-Kote’s ease of application and the durability of the finish when proper techniques are followed, especially using an airbrush. However, some users faced issues with spray inconsistencies and drying times. Overall, it’s considered a solid choice for gun refinishing, offering a great glossy or matte finish depending on usage.

What Reviewers Are Saying

Application Techniques

60%

Many users emphasize the importance of proper application techniques, such as using an airbrush instead of HVLP spray guns and ensuring parts are heated before coating. Proper distance and technique lead to smoother finishes, and some reviewers highlight the need for patience in the drying process for optimal results.

Finish Quality

50%

Reviewers frequently praise the quality of the finish, noting its durability and aesthetic appeal when applied correctly. However, some reported issues with color consistency and unwanted sheen variations, particularly with matte options, suggesting that results can vary based on application method and environmental conditions.

Durability

45%

Customers generally find the durability of Gun-Kote impressive, noting that it withstands typical handling and adds protective qualities to firearms. Yet, some users experienced chipping and peeling, particularly on sharp edges, highlighting the importance of thorough preparation and following the specific instructions closely.

Preparation Process

55%

A common theme among the reviews is the necessity of thorough preparation, such as cleaning and degreasing surfaces properly to ensure adhesion. Many users found that taking the time to prep surfaces according to the instructions yields the best results, while improper prep leads to failures in adhesion.

Product Consistency and Experience

40%

Several reviews express dissatisfaction with consistency, particularly regarding spray issues and products being unusable out of the can, leading to concerns about quality control. Additionally, those with prior experience in similar products have varied opinions based on their expectations and applications.

Sort by Filter by rating

Should be labeled Gloss Gunmetal Purple

Ordered this after reading other stories of peoples successes with this product, and since I offer only coating finishes in my shop, and not bluing, I thought this would be a great option for my customers that want a traditional glossy blued look. First thing I did was take a Kimber Ultra CDP-II compact 1911 (aluminum frame, needed something better than the horrible KimPro-II factory junk) and abrasive blasted the frame with 120 grit alum-oxide at 45 psi, fully degreased with acetone and gassed out in oven at 140 degrees, then misted on a few coats of K-Phos. When I began applying the finish, I noticed how thin it was, extremely thin. It was covering nicely, but had a weird "greenish-purple" hue to it depending on how the light was hitting it. I paid no attention, thinking that it would darken properly after curing. After I baked the frame, then let it cool, the frame had a very purplish hue to it... If you saw it in low light, it looked wonderful. But viewing it in bright light shown the purple horribly. I was pleased by how glassy-smooth the finish was, and was so thin that I didn't have any problems with pins or slide rails being too tight... the color just didn't work. After doing some research, I found that I may have overcooked it, or baked at too high of a temp... I am going to give this another try before condemning it altogether. Also, I do this for a living, and apply mostly Cerakote H series in my shop, and have used most every other product out there - so I'm no stranger to this process. Another idea I am going to try, is to add a little gloss black GunKote to this to perhaps darken out the green/purple sheen. Remember those Ford "Mystic" Cobras that were made in the late 90's? Remember the "Mystic" paint that changed colors depending on the light, going from purple, to green, to blue... That reminds me of this finish!!