GUN-KOTE™ OVEN CURE, GUN FINISH Reviews & Ratings

The world-famous, ultra-thin, friction-reducing coating that lasts and lasts can now be applied to any clean, pre-heated metal part in as little as 2 hours. You get the quality of genuine GUN-KOTE backed by Brownells no-hassle, complete satisfaction guarantee; an unbeatable combination!

Now you can easily apply the self-lubricating benefits of molybdenum disulfide to alloy steel, stainless steel, brass and aluminum, even properly prepared nickel plating, in just minutes. Prepare, clean and pre-heat your part to 100°, spray on Brownells GUN-KOTE and allow the part to dry. Bake the part in an oven at 325° for one hour and you’re done. You’ve protected the metal parts of your valuable firearm from rust, corrosion, and scratches with a beautiful finish that will wear for years and help keep your gun looking just like new.

Brownells GUN-KOTE is a durable, second-generation epoxy, thermo-set resin finish that will not break down, peel or dissolve. In fact, once it’s applied, the only way to remove Brownells GUN-KOTE is to abrasive blast the part. It is resistant to all known gun solvents and thinners. Each coat is approximately .0004" thick so Brownells GUN-KOTE can be used on both internal and external parts where a close-tolerance fit is required without having to worry about interference. This makes Brownells GUN-KOTE the perfect, maintenance-free coating for handgun slides and frames, shotgun receivers and magazine tubes, rifle actions and bolts, anywhere you need an ultra-thin, self-lubricating, permanent coating that protects and wears like crazy.

Liquid - 8 fl. oz. (237 mL).

THINNER NOT REQUIRED

View Product

Write a review

Reviews Summary

Customers often rave about Gun-Kote’s ease of application and the durability of the finish when proper techniques are followed, especially using an airbrush. However, some users faced issues with spray inconsistencies and drying times. Overall, it’s considered a solid choice for gun refinishing, offering a great glossy or matte finish depending on usage.

What Reviewers Are Saying

Application Techniques

60%

Many users emphasize the importance of proper application techniques, such as using an airbrush instead of HVLP spray guns and ensuring parts are heated before coating. Proper distance and technique lead to smoother finishes, and some reviewers highlight the need for patience in the drying process for optimal results.

Finish Quality

50%

Reviewers frequently praise the quality of the finish, noting its durability and aesthetic appeal when applied correctly. However, some reported issues with color consistency and unwanted sheen variations, particularly with matte options, suggesting that results can vary based on application method and environmental conditions.

Durability

45%

Customers generally find the durability of Gun-Kote impressive, noting that it withstands typical handling and adds protective qualities to firearms. Yet, some users experienced chipping and peeling, particularly on sharp edges, highlighting the importance of thorough preparation and following the specific instructions closely.

Preparation Process

55%

A common theme among the reviews is the necessity of thorough preparation, such as cleaning and degreasing surfaces properly to ensure adhesion. Many users found that taking the time to prep surfaces according to the instructions yields the best results, while improper prep leads to failures in adhesion.

Product Consistency and Experience

40%

Several reviews express dissatisfaction with consistency, particularly regarding spray issues and products being unusable out of the can, leading to concerns about quality control. Additionally, those with prior experience in similar products have varied opinions based on their expectations and applications.

Sort by Filter by rating

Gun Kote, gloss and matte black.

I chose this product after reading the aerosol cans poor performance, and used a Dura Coat spray kit, having used it with good results with a duracoat paint earlier. Neither the matte black or gloss black sprayed well. Both were well shaken before use. The gloss sputtered and spit-there was no misting of product. For the second coat I switched to matte as the gloss was a little too gloss for my taste. The matte looks better, and it is still cooling, but the sputtering and spitting was the same. There was no mention of diluting it, so I have to believe this stuff is not meant to spray regardless of the product claim. Too soon to tell if it will stick as advertised or not.

Works as described, but...

I used this coating on a build project SS 1911 frame and slide. I did all the described prep work: abrasive blasted, degreased, handled with latex gloves, preheated, etc. After re-lapping the rails when coated, the slide feels like it rolls on ball bearings! A+ for that. Finish is very durable, except you must realize that an extremely brittle coating is very vulnerable on all of the sharp edges that occur on a 1911 frame and slide. Edges are easily chipped. D- for that. Maybe I applied it too heavy? (I applied 3 passes, 1 coat with an airbrush as recommended) Directions should warn about this! I would give it a solid 3 stars, except I also am not content with the luster of the "matte" finish. In my opinion, it is a "satin" luster, with a noticeable but subtle sheen. Would I recommend this to someone else? Yes, but not without warning them of the significant drawbacks.