Well Fitting
Bought both the Objective and Occular covers. They fit well with a tight fit and open flat covers are great.
Would you recommend this?
Yes, I would recommend to a friend
Fits Very Well
These fit very tightly on the Viper PST Gen II. Having the Caps fold al the way flat is a good feature to have.
Would you recommend this?
Yes, I would recommend to a friend
Works well, but no DOPE data stickers
Works well, but no DOPE data stickers. Why advertise them when you don't provide with the product as pictured?
Good Caps
I bought six of these caps for the three scopes I own, only one of which is a Vortex. Vortex likely makes a cap to fit both ends of most scopes. These caps are perfect in every way EXCEPT for one: the flip-up cap has a death grip on the body of the assembly so that, when the cap is flipped, the body wants to peel off of the end of the scope or, at least shift enough to require re-positioning. Or the user can grip the rubber body and open the cap with the other hand, but this is inconvenient. I fixed this problem by removing most of the tiny latching ridge on the side of the end of the male part of the body that fits into the female part of the cap. I did it by carefully shaving off the ridge with a small, sharp wood chisel. I left about of the bottom center (opposite the hinge) of the ridge in place. Then I smoothed the part where the ridge was trimmed away with a small flat file. I also applied a tiny amount of silicone grease on the remaining latching ridge. This modification allows the cap to be easily flipped open without causing the whole assembly to peel off of the end of the scope. The cap will not spontaneously open even if the rifle butt is slammed against the floor. I would recommend this to a friend with the caveat that it needs to be modified to work properly.
