great sights
The instructions were hard to read. I found a youtube vid that recommended dis-assemble and re-assemble inside a gallon zip lock bad - best advice ever - the tiny parts/spring are easily recovered from fumbling fingers inside the bag. The sights are very crisp and the rear is easily adjusted.
Works great!
Fit perfectly on my Buckmark. Easily replaced my existing adjustable all black sights. The rear sight is a little tricky to install. You have to punch the front pivot pin out. Once off, there is another tiny pin to punch to remove the ratchet detente for the height adjustment screw. I found that this little pin can be pushed out with a regular size paperclip. Once installed, the sight picture looks great.
Excellent Sight Picture
These are excellent sights that work well in low light and cement the Buckmark's reputation as a tack driver. The rear sight install is tricky with a tiny spring that has to be just right. I would rate these 4 and on half, but can't rate for a half. Take your time and be careful on the front sight install. I think there is a helpful Youtube video as well. These are excellent sights.
The Cat's Meow!
I have two pistols that needed sight up-grades. Both were Browning Buck Marks. The change over is not too bad, just take your time with the rear sights. Once done, you'll be able to see your sights for that quick shot!
Great sight.They are like rifle sights.
These are more precise like rifle sights.They are a little pricey so they should install themselves,but are worth it.Williams also did not put an arrow as to which way to turn the elevation and windage adjustments like the original sights has.They are made well and has increased my accuracy considerably.Oh,by the way,don't forget to put a drop of thread lock on the front sight screw.
Wow, what an improvement.
Vastly improved the sight picture. Super easy to install. No extra parts to confuse installer. Great visibility against dark background .
Only fits newer models
Looks great! This is for newer guns. Will not fit older models with sights under 1" long.
great, but doesn't fit on TacSol rail
I bought these sights for my Buckmark. They are super bright. Very impressive. The front sights are easy to install. The rear sights were a bit more of a pain to install; however, it is very do-able with the original Buckmark rail. My problem with the sights was that I was hoping they would fit on my TacSol Buckmark rail. Unfortunately, the TacSol rail uses its own proprietary rear sight that is completely incompatible with the original BM sight and Williams sight. So, it didn't work out for me, but that was not fault of the Williams Fire Sights.
Great sights, really nice contrast
May need to purchase a pin punch for the Micro Pin that is in the rear sight assembly on the Browning Buckmark. Brownells 080-507-239WB is perfect for this.
Does not fit
this item was supposed to fit a Buckmark with a 1" long rear sight. It might, but, why try when the front sight is for a round barrel. My Bucmark is ribbed down the entire barrel. It is flat. Item is not properly described.
