GREAT PRODUCT
These are well constructed 6.5 Creedmoor magazines, and the ONLY brand that I carry in my shop...ZERO complaints...
Better built & cheaper than a Magpul
Although the 10023923 & 100034423 appear identical in the description, with the same fit & finish, these 100034423 have the round count witness holes while the 10023923 do not. These magazines are a little tight on my WW AR10, but D&H is the magazine manufacturer chosen (at the time of my purchase) of my Windham Weaponry 6.5CM, & I can see why. Inexpensive (as far as AR10 magazines are concerned), & very solid in construction, yet allow the full maximum length of 2.8" required of the 6.5CM & their high BC bullets. They do allow insertion of a fully loaded 20 round magazine on a closed bolt (many magazines only allow 19 rounds), without any feeding issues. I have found them to be 100% reliable under every situation, & conditions. They do require a hard tap on the bottom (just like my USAF issue M16A2) to be properly seated, but when properly done they lock in solid, but because of the tight fit do not drop free on their own (at least in my WW AR10). In short my ammo box contains more magazines made by D&H than any other manufacturer.
Very nice feel
I bought thid to have a 5 rd mag for my Aero Precision M5. I have both .308 Win and 6.5 CM rifles and like this mag because I can use it in both. I think it will feed the longer 6.5 cartridges better than the Magpul. Plus I needed a 5 rd mag for hunting, and this was the only one I could find. Seems to be very nice quality, and I will buy more.
Nogo in Creedmore
Did not load, did not work in my 6.5 Creedmore, DPMS AR10
Loose fitting in AR-10, sloppy follower
Sloppy fit in my AR10 6.5 Creedmoor. The follower tips a lot and the rounds don't load the best.
Just like every other low dollar mag
I’ve been testing mags for My AR10 and like the others the last two rounds will tilt upwards in the mag and feed improperly. It completely mashed two casings.
Load problem
I have a 5 round mag from D&H. I can not get it to load the first round at all and the last round jams. This mag appears to be different than several others I have. The back catch to keep the bolt open after the last round, is significantly farther to the rear. About 3/16 of an inch. The bolt never locks open on the last round. The rounds also sit significantly farther to the rear. So much the the bolt can not consistently catch the round. I am still investigating but I am very disappointed. Perhaps it is less expensive for a reason.
Bolt will not close
This mag when seated in a Larue 6.5 Rifle will not allow the bolt to close. Even when empty, the bolt will not close as the feed lips stick up to high or the mag catch was not cut right. After trying fitment, the back of the feed lips bent. I have had no problems with the 308 version however.
