AR-15/M16 IMPROVED REDI-MAG Reviews & Ratings

Don’t lose precious seconds in competition or combat fumbling for a spare magazine during a reload. This rugged speed loading system clamps directly to the lower receiver of any AR-15/M16 rifle or carbine and securely holds a second, fully loaded magazine alongside the mag well for super-fast mag changes. More reliable and easier to use than improvised methods, like taping two magazines together, that can cause malfunctions at critical moments. Closed-top design protects the spare mag from rain, dirt, dust, and debris and prevents the top round from jumping forward under recoil. Independent release system lets you drop the spare mag and the mag in the weapon separately to allow tactical reloads and greater flexibility in clearing malfunctions. Bolt Catch Extension (BCE) mounts directly to the factory bolt catch and lets you release the bolt, with or without the Redi-Mag attached to the gun, simply by slapping the BCE with an open palm. Installation requires no permanent alterations to receiver or mag well. Designed for mil-spec receivers; may not fit custom billet receivers. Steel model available in Standard configuration model that enables faster installation and removal of the entire Redi-Mag from the weapon.

SPECS: Steel, Parkerized, or 6061 T6 aluminum, hardcoat anodized, both dark gray, with reinforced molded polymer BCE and spacer. 3Ѕ" (8.9cm) long, 2Ѕ" (6.4cm) wide, 2ѕ" (7cm) high. Weight: 8.4 oz. (234g) (steel), 5.6 oz. (159 g) (aluminum). Fits AR-15/M16/M4 rifles and carbines with standard forged lower receiver.

See all of our AR15s and AR15 parts here.

View Product

Write a review

2 Stars

Reviews Summary

The AR-15/M16 Improved Redi-Mag is praised for its ease of use, quick reload capabilities, and secure magazine storage. Many users commend its utility for tactical situations despite installation challenges and some compatibility issues with specific lowers and PMAGs. Overall, it is seen as an essential addition for efficiency in reloading, particularly for left-handed users.

What Reviewers Are Saying

Installation

40%

Installation experiences vary among users, with some reporting difficulties such as misaligned screw holes or the need for adjustments with tools. While the process can be challenging, many agree that it's manageable with the right approach. Approximately 40% of reviewers mentioned difficulties or adjustments needed during installation.

Ease of Use

60%

Reviewers consistently highlight the Redi-Mag's ease of use during reloads. It allows for quick magazine switches, significantly enhancing reload speed. Users appreciate having a spare magazine directly attached, reducing the need for pouches. About 60% of reviewers underscored the convenience it offers.

Compatibility Issues

30%

Some users experienced compatibility issues, particularly with certain AR lowers or specific magazine brands like PMAGs. A few reviews noted friction with other components, impacting performance. This theme was mentioned by roughly 30% of reviewers, indicating the Redi-Mag's fit may vary based on the specific AR setup.

Durability and Longevity

50%

Many users have had the Redi-Mag in service for over a decade without issues, indicating a high level of durability and reliability. Reviews reflect that it stands up well to rigorous use in tactical situations, contributing to its reputation as a solid investment. About 50% of reviewers referenced the long-lasting nature of the product.

Recommendations for Improvement

25%

Some suggestions for improvement included a desire for more straightforward installation and a request that certain components, like rubber gaskets, be redesigned for better fit and protection. These constructive criticisms suggest areas where user experience could be enhanced, mentioned by about 25% of reviewers.

Sort by Filter by rating

Mag ready

I've been thinking of getting this for years. I was concerned the steel would be too heavy. After installing I picked up the ar and realized it wasn't bad at all. Besides once you install a full mag "it's heavy!" Installation was pretty simple. I used a small clamp to hold the screw section together to install the screws though it did come with a screw and nut to do the same thing. The worst part was the nylon nuts. That was a bit of a PITA but with the right tools still hardly an issue. I use 20 rounders for general SD since I'm not in LE. Im also left handed and it worked well for me. A little practice and mag changes were quick and easy. I'll keep practicing to make sure it's second nature. I'm going to install another on my house SBR. HIGHLY RECOMMENDED.

Must have for tactical reloads

I've had this on my AR15 for well over 10 years and it's the old version. Once you are adapted to it, you will find you are the fastest guy on the line as your backup mag is right with you. Has never failed to drop the mag. Simply grab the reload mag before you punch the mag release and as the empty mag drops free, slide in your backup mag. It does make your gun heavier but doesn't seem to affect the balance. I'm ordering a new aluminum RediMag for a new gun. Works with BAD lever, another must have.

very useful

Mine has been in service on my duty rifle for over 10yrs. No problems whatsoever. Would definitley buy again. Some things are "cool". This item is USEFUL.

Fast/Tactical reload a must? Get this!

This product is GREAT! Hands down. It keeps a fully loaded mag right next to the one in the gun. Just hold the full one, drop the empty and switch 'em. Left handed AR owner? Works just fine for us (yes, I'm one too)though it's not a must, I would recommend the Magpul B.A.D Lever. It works with the Redi-Mag and makes it a lot easier to operate the bold release.

Great Product

Gives you a spare mag without having to mess with pouches. You're hand doesn't have to leave the rifle for more than a couple of seconds. Does not work well with PMAGs since they only have a small indent.