Fall Build Fest Continues - 15% OFF GUN PARTS THIS WEEK
Use Code: PARTS15

1-DAY FLASH SALE - 10% Off Fusion Firearms Competition 1911s! Use Code: FUSION10

ALUMA-HYDE® II Reviews & Ratings

ALUMA-HYDE II

The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethylene. Today’s family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications.

Each can of Aluma-Hyde II is now supplied with a Clean Out Nozzle, required to be used before each use of the paint to prevent clogs in the Nozzle and Pickup Tube. Aluma-Hyde Clean Out Nozzles allow nearly unrestricted pressure to flow through the pickup tube and nozzle to clear out any semi-hardened paint that may be in the pickup tube. Once clear, replace with the original spray nozzle and start your project. When used correctly, this will ensure a smooth, sputter free paint application free of clumps or inconsistencies.

Additional Clean Out Nozzles can be purchased as singles, 430107431, or in a 12-pack, 084179004. Clean Out Nozzles are not intended for finish spraying.

SPECS: 12 oz. (340 g) aerosol can.

INSTRUCTIONS:

PREP THE SURFACE: NO priming required on clean, bare metal or anodized surfaces. Surface should be dry and free of oil, wax, dirt, loose paint, and any other contaminants. Painted surfaces should be washed with a cleaner degreaser. If cleaning parts with abrasive blasting, make sure blasting media is oil- and silicone-free. Test a small area for color compatibility and adhesion.

• Unpainted aluminum: Abrasive blast to achieve desired surface look/texture.

• Unpainted steel: Remove rust by sanding or abrasive blasting.

• Fiberglass: Sand lightly, then wash with soap and water or clean with a quality cleaner degreaser.

• Wood: Seal or fill surface. ALUMA-HYDE II can be applied over polyurethane and varnish finishes but not over linseed oil or tung oil finishes.

PREP CAN: For best results, use between 70° F and 90° F (not below 65° F). Shake can vigorously until the ball inside rattle; then shake for 2 minutes more to achieve correct color and texture.

INITIAL CLEARING SPRAY: Before spraying work surface, point can in safe direction and depress valve. Press until spray is consistent in color and consistency. The cleanout nozzle can be used in this step for previously used, or even new cans. The cleanout nozzle is used to ensure any residue or buildup is easily ejected from the can. Simply pull the standard nozzle upwards off the can and press the cleanout nozzle down in its place (be careful to point can in safe direction when pressing downwards, as can may discharge spray).

Cleanout Nozzles are included with each can of Aluma-Hyde purchased from Brownells and is available separately. Search item number 430107431.

SPRAY IT ON: Hold can approximately 12” away from the work surface and fully depress valve on top to start the spray. Shake can periodically during application process.

LET IT CURE: This is a critical step in getting a truly tough, long-lasting finish! If a second coat is needed, it should be applied within 30 minutes. After 30 minutes, Aluma-Hyde II must be allowed to cure 10-14 days before recoating.

• Dries to a light touch in approximately 10-15 minutes. Wait 24 hours or more before extensive handling.

• Complete cure time caries depending on film thickness, temperature, and humidity

• Cure time can be reduced by circulating warm air (90°F max.) or placing part in direct sunlight.

• Aluma-Hyde II can be “speed cured” by baking the part for 3.5 hours at 195°F. Allow part to cool before applying another coat.

View Product

Write a review

Reviews Summary

Aluma-Hyde® II garners mixed feedback, with many users appreciating its cost-effectiveness and ease of application, while others encounter issues with nozzle clogging and inconsistent color matching, particularly with the FDE variants. Durability after curing is generally praised, though some users report chipping and flaking over time. Overall, users recommend proper prep and caution for the best results.

What Reviewers Are Saying

Application Process

70%

Many reviewers emphasize the importance of following the application instructions precisely, including thorough cleaning and allowing adequate cure time. Users highlight that successful application often requires shaking the can extensively and avoiding excessive heat when curing.

Durability

65%

The durability of Aluma-Hyde® II is frequently mentioned, with many users noting it holds up well under regular use. However, some express disappointment when experiencing chipping or wear, especially in high-friction areas.

Color Match

60%

Color consistency is a significant concern. Several users report discrepancies between the color on the cap and the actual paint, particularly with variants like Coyote and FDE. Aluma-Hyde II is described as closer to Sage or light tan rather than the expected hues.

Nozzle and Clogging Issues

55%

Numerous reviews highlight issues with the spray nozzles clogging shortly after use, leading to spattering or inconsistent application. Users recommend purchasing extra nozzles as a precaution.

Value for Money

75%

Despite the mixed feedback, many users find Aluma-Hyde® II to be a cost-effective alternative to professional coatings like Cerakote. The majority feel that it delivers adequate performance for the price, especially for DIY projects.

Customer Photos & Videos

Sort by Filter by rating

Even with extensive cleaning a prep this product is temperamental.

Product has peeled up even after extensive de-greasing, cleaning, and light scuffing.

by Brendan R. on August 03, 2026

Verified Purchase

Was this review helpful? 0

Coyote color

I have B5 coyote tan stock and I wanted my rifle accessories to match the same color. I tried it on several items and the color is more sand than coyote brown.

by ADRIAN M. on June 15, 2026

Verified Purchase

Was this review helpful? 1

Not the color I expected

I purchased the dark parkerzing grey. I expected a dark grey to graphite color. What I got after spraying the paint was almost an dark OD green.

by Robert S. on February 14, 2026

Verified Purchase

Was this review helpful? 0

colors not consistent and peels too easily

Given the good reviews of this product I was excited to try it but I am unimpressed. The color of the titanium is much too green and doesn't match phtos. The baked parts do not match the color of the air cured parts (that I cannot bake due to material temp. tolerance) and despite meticulously following instructions (degreasing, even extra brushing/roughing/buffing steps and repeated acetone cleaning plus powder thin coats, following timing, etc.) this paint takes much longer than listed cure times, baking left the coating malleable and then still fails later (fingernail scratch). And before anyone asks, yes, instructions followed to the letter, even stripped and recoated one piece to be certain. I've done coatings on auto parts, hunting bows and other things in the past and been more sucessful. The process has taken a month including curing time and I don't find this product to be even as durable as "anybrand" off the shelf enamels.

by Andrew V. on November 30, 2025

Verified Purchase

Was this review helpful? 0

Temperamental

This paint is very temperamental and will bubble up sometimes causing you to start over. I always put a lot of time into prep work and have used other paints without issue. Disappointing, this is at least the third time this has happened.

Poor supply chain

Always waiting for colors to come back in stock, that is the biggest problem I have with this product. When I do receive a new can of a color that I’ve used previously it just doesn’t quite match but that is a dye/lot issue and I get that. It really depends on how much you use I guess. Colors don’t always match the caps on the spray cans and neither of the parkerized “gray” colors are actually a gray color, definitely more “OD green”. There needs to be an actual dark gray, the wolf and “stainless” colors are too light. Otherwise great product if you want a durable finish. Aluma-Hyde colors seem to darken slightly as they dry so give it some time to dry before you judge the color. Just make sure that you try it on a test piece first to make sure you like the color. This product seems to appear different depending if it is applied to wood, cardboard, metal or synthetics so make sure you like it first if you don’t own an abrasive blasting cabinet to reset any mistakes. The attached photos show samples of the coyote and dark parkerized gray colors. The AH II coyote sample swatch was placed on one of my coyote carriers next to a magpul coyote sling and a piece of natural burlap for reference. The the AH II dark parkerized gray color sample was placed on an OD bag for reference. Reminds me more of the older OD uniforms in real life than a parkerized gray.

Would you recommend this? Yes, I would recommend to a friend

by Matt on August 27, 2024

Verified Purchase

Was this review helpful? 1

Not great.

Colors nice, cans are absolute trash. Cheap, bad nozzle.

Bad batch???

So I followed the instructions and stuff came out in globs. Globs of paint covered glue it seemed. Ran it down to about half a can and kept shaking/agitating to get it to mix up inside. It did get better, and when I tested it on a piece of cardboard, it seemed to work. So, I went ahead and applied it to a $130 handguard I just bought…and wouldn’t you know it, little tiny globs began to appear. This really pissed me off so I called Brownells and they shipped me a new can for free.

by Jeffrey M. on January 03, 2024

Verified Purchase

Was this review helpful? 0

aluma hide black color

I shake very well the can and paint came out as a texture spray instead of spray paint.

by Miguel C. on December 14, 2023

Verified Purchase

Was this review helpful? 1

bubbles

The good - the color is good and the finish is tough (that's where the two stars come from). The instructional video series is great. The bad - the spray texture is unpredictable. It randomly sputters and throws out bubbles and crazy chunks despite my shaking it for 5 minutes and spraying in 70 degree weather. Photo evidence attached.

by eric on November 20, 2023

Verified Purchase

Was this review helpful? 1