1911 EXTENDED THUMB SAFETY Reviews & Ratings

Single side design with serrated surface provides fast, positive operation and a comfortable thumb position with minimal bulk for easier carry. Wide - Extra large, full-length thumb pad can be used full size for maximum thumb engagement or custom contoured to meet special requirements. Tactical - Shorter, slimmer thumb pad won’t snag on holster or clothing; helps prevent accidental disengagement during the draw. Minimum size; best for concealed carry or tactical use. Minimum size is ideal for concealed carry. Bullet Proof® (BP) models are precision machined from billet steel for installations where only the best in fit, finish, strength, and durability will do. Available with traditional left-side only thumb pad or ambidextrous pads for maximum tactical efficiency. Low Lever – Slim, Tactical-style pad is positioned low for faster thumb contact and rapid, short-throw disengagement.

SPECS: Steel, blued or stainless, matte or polished finish. Pin diameter is .002" oversize; fitting required. Pad Size: Wide - 1" (2.5cm) long, 3/16" (4.8mm) wide. Tactical - .750" (19mm) long, 1/8" (3.1mm) wide. Bullet Proof (BP) - .750" long x .230" (5.8mm) wide. Low Lever - 7/8" (2.2cm) long, 5/32" (4mm) wide.

View Product

Write a review

Reviews Summary

The Wilson Combat 1911 Extended Thumb Safety boasts excellent quality and finish, with many users noting its comfortable fit and functionality after necessary fitting work. However, several reviewers faced significant fitting challenges, particularly regarding oversized pins and dimensions, which detracted from the overall experience. While many appreciate its craftsmanship, potential buyers should be prepared for modification.

What Reviewers Are Saying

Product Quality

62%

Reviewers frequently highlighted the exceptional quality of the Wilson Combat thumb safety, praising its craftsmanship, polished finish, and overall functionality once fitted adequately. Many felt it was an excellent replacement that stood out against competitors.

Fitting Required

78%

A common theme across reviews is the expectation of fitting requirements. While many acknowledged that most 1911 safeties require fitting, several customers expressed frustration with the degree of fitting necessary for this product, especially regarding oversized pins and dimensions.

Customer Experience

55%

Customer experiences vary widely; while some found the installation straightforward after minor adjustments, others reported significant challenges or disappointment due to the fitting issues. Overall, the need for detailed fitting instructions was noted.

Ease of Installation

60%

While some users had an easy installation experience, others lamented the difficulties encountered, largely stemming from unexpected fitting issues. This topic underscored the variability in product compatibility across different models, impacting user satisfaction.

Compatibility Issues

50%

A notable number of reviews highlighted compatibility issues with specific models, leading to confusion and dissatisfaction among users. This theme illustrated a need for clearer specifications and recommendations for compatibility with various 1911 brands.

Sort by Filter by rating

Easy to install, just go slow.

This is overall a very good quality safety. Fitting was fairly easy. Just go slow and compare your OEM safety with this one as you go. A few stone/fine file strokes at a time with frequent fit checks goes a long way. Use calipers if you have them. Only issue I ran into was the back of the safety had manufacturing burrs that I didn't notice or feel before I started fitting. These really scuffed up my finish by the time I was done. I ended up using a high grit sandpaper and bluing it and the frame. Everything turned out looking very good in the end. Best of all, my gun is safe and my arthritic thumb doesn't get worn out using the safety. Remember, go slow and view videos online if you need.

Works And Feels Good

I installed my new Safety on my Colt 1911 22 Gold Cup Trophy. It is 80 % compatible with normal parts for the 1911 but I needed to fit this Safety. It didn't take much, The bottom left, where the detent is, needed to be file down a tad. I also had to fit it to get it to reliably go to Safe or Fire mode. I do like the feel and the look of my new Safety and would recommend it to anyone wanting a larger Safety.

NOT a drop-in item

Installed on a Colt stainless steel Commander. I had to reduced the size of the post that goes through the frame and grip safety considerably, reduce the diameter of the cylindrical part containing the sear egagement part to clear the frame and then as expected had to file the surface that mates to the sear. It required two hours of work but the results were fabulous. It looks fantastic, works as designed and snicks on and off smoothly with a positive detent both ways. If you are up to the fitting part of the job, it is a great item.

Nice Safety

Installed on my government model Colt, nice polished blue finish. Thumb pad is very large but gives you plenty material to recontour.

Looks good

This part definitely requires fitting for Remington 1911R1 I'm no gunsmith but I made pretty quick work of it. Once the fitting is out of the way it works well and looks good. Much better to work with than the STI piece I bought first.

Nice Product

Used in a "scratch build" of an (iffy?) Essex frame Government Model. Part is very square and pin size fit very well. Safety cam was over-sized and requires extensive fitting/reshaping. Once fit, looks and functions flawlessly with zero movement in trigger/sear.