Fails to feed
I ordered 2 of these mags and neither will feed the first load correctly when fully loaded. The load tips down and noses into the end to the mag instead of traveling up the ramp into the chamber, resulting in the bullet being pushed back into the cartridge. What good is a 10 round mag if you can only load 5 rounds in it to get it to function correctly?! I've tried different brands of ammo with the same results. I have other mags made by the same manufacturer that work flawlessly.
Not a good purchase
I recommend these magazines if you enjoy failure to feed issues. I bought the 3 pack and only had issue with one at first, after running about 100 rounds through them I noticed it was getting worse and worse across the trio. Then after having them loaded with 10 rounds and carried in the mag carrier on my duty belt, they wouldn't even chamber. The cartridge would nose down into the body of the magazine and catch in the front of the magazine. They were difficult to unload the magazines by hand. Sorry Brownell's I can't give them a good rating, I wish they were better.
.45 Mags👍 9mm mags 👎
I ordered a three pack of 9mm mags after having great results from the .45 Brownells mags. I was very disappointed in the 9mm variant. My otherwise reliable Springfield and Alfa Fixtrot became a single shot with these. Repeatedly needed the slide pushe forward after the bullet would stop and would not feed until the last two rounds in the magazine. Factory and Wilson mags were fine. I ordered another brand.
Doesn't work reliably if more than 7 rds
In my Springfield Ronin Operator, these mags have too much tension for a new round to feed if there are 8 or more rounds in the mag. The slide just gets stuck with the round pressed against the front of the mag lips. It's also virtually impossible to remove the rounds by hand if there are more than 7 rounds in the mag, which is inconvenient. The rounds simply won't budge unless you use a tool like the UpLULA and lots of finger strength, while pointing the tip of the round in the right direction (it wants to go down into the mag instead of up and out). The mags work fine with 7 or less rounds. The Mec-Gar anti-friction 10-round mags work fine, and cost about the same. Also I have a Wilson Combat 10-round mag that works fine.
Not very happy
they wouldn't work for me i got them for my colts but no luck not one of the three worked im little disappointed but it is what it is
No Love for a Ruger SR 1911
Failure to feed every 2 to 4 rounds regardless if 115, 124, or 147gr and whether fmj or hp.
WON'T DROP FREE
I BOUGHT TWO OF THESE MAGS FOR A KIMBER STAINLESS II. BOTH MAGS WOULD NOT DROP FREE WHEN THEY WERE EMPTY. THEY FELT LIKE THEY WERE DRAGGING IN THE MAG WELL. THEY WOULD NOT EVEN SHAKE LOOSE, THEY HAD TO BE PULLED OUT. I DON'T KNOW WHY, DON'T CARE. I'M SENDING THEM BACK AND I'LL TRY A DIFFERENT BRAND. I USE THIS GUN FOR COMPETITIONS AND THEY HAVE TO FULLY FUNCTION. I HAVE HAD NO SUCH ISSUES WITH THE STOCK MAG.