Fall Build Fest Continues - 15% OFF GUN PARTS THIS WEEK
Use Code: PARTS15

1-DAY FLASH SALE - 10% Off Fusion Firearms Competition 1911s! Use Code: FUSION10

ALUMA-HYDE® II Reviews & Ratings

ALUMA-HYDE II

The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethylene. Today’s family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications.

Each can of Aluma-Hyde II is now supplied with a Clean Out Nozzle, required to be used before each use of the paint to prevent clogs in the Nozzle and Pickup Tube. Aluma-Hyde Clean Out Nozzles allow nearly unrestricted pressure to flow through the pickup tube and nozzle to clear out any semi-hardened paint that may be in the pickup tube. Once clear, replace with the original spray nozzle and start your project. When used correctly, this will ensure a smooth, sputter free paint application free of clumps or inconsistencies.

Additional Clean Out Nozzles can be purchased as singles, 430107431, or in a 12-pack, 084179004. Clean Out Nozzles are not intended for finish spraying.

SPECS: 12 oz. (340 g) aerosol can.

INSTRUCTIONS:

PREP THE SURFACE: NO priming required on clean, bare metal or anodized surfaces. Surface should be dry and free of oil, wax, dirt, loose paint, and any other contaminants. Painted surfaces should be washed with a cleaner degreaser. If cleaning parts with abrasive blasting, make sure blasting media is oil- and silicone-free. Test a small area for color compatibility and adhesion.

• Unpainted aluminum: Abrasive blast to achieve desired surface look/texture.

• Unpainted steel: Remove rust by sanding or abrasive blasting.

• Fiberglass: Sand lightly, then wash with soap and water or clean with a quality cleaner degreaser.

• Wood: Seal or fill surface. ALUMA-HYDE II can be applied over polyurethane and varnish finishes but not over linseed oil or tung oil finishes.

PREP CAN: For best results, use between 70° F and 90° F (not below 65° F). Shake can vigorously until the ball inside rattle; then shake for 2 minutes more to achieve correct color and texture.

INITIAL CLEARING SPRAY: Before spraying work surface, point can in safe direction and depress valve. Press until spray is consistent in color and consistency. The cleanout nozzle can be used in this step for previously used, or even new cans. The cleanout nozzle is used to ensure any residue or buildup is easily ejected from the can. Simply pull the standard nozzle upwards off the can and press the cleanout nozzle down in its place (be careful to point can in safe direction when pressing downwards, as can may discharge spray).

Cleanout Nozzles are included with each can of Aluma-Hyde purchased from Brownells and is available separately. Search item number 430107431.

SPRAY IT ON: Hold can approximately 12” away from the work surface and fully depress valve on top to start the spray. Shake can periodically during application process.

LET IT CURE: This is a critical step in getting a truly tough, long-lasting finish! If a second coat is needed, it should be applied within 30 minutes. After 30 minutes, Aluma-Hyde II must be allowed to cure 10-14 days before recoating.

• Dries to a light touch in approximately 10-15 minutes. Wait 24 hours or more before extensive handling.

• Complete cure time caries depending on film thickness, temperature, and humidity

• Cure time can be reduced by circulating warm air (90°F max.) or placing part in direct sunlight.

• Aluma-Hyde II can be “speed cured” by baking the part for 3.5 hours at 195°F. Allow part to cool before applying another coat.

View Product

Write a review

Reviews Summary

Aluma-Hyde® II garners mixed feedback, with many users appreciating its cost-effectiveness and ease of application, while others encounter issues with nozzle clogging and inconsistent color matching, particularly with the FDE variants. Durability after curing is generally praised, though some users report chipping and flaking over time. Overall, users recommend proper prep and caution for the best results.

What Reviewers Are Saying

Application Process

70%

Many reviewers emphasize the importance of following the application instructions precisely, including thorough cleaning and allowing adequate cure time. Users highlight that successful application often requires shaking the can extensively and avoiding excessive heat when curing.

Durability

65%

The durability of Aluma-Hyde® II is frequently mentioned, with many users noting it holds up well under regular use. However, some express disappointment when experiencing chipping or wear, especially in high-friction areas.

Color Match

60%

Color consistency is a significant concern. Several users report discrepancies between the color on the cap and the actual paint, particularly with variants like Coyote and FDE. Aluma-Hyde II is described as closer to Sage or light tan rather than the expected hues.

Nozzle and Clogging Issues

55%

Numerous reviews highlight issues with the spray nozzles clogging shortly after use, leading to spattering or inconsistent application. Users recommend purchasing extra nozzles as a precaution.

Value for Money

75%

Despite the mixed feedback, many users find Aluma-Hyde® II to be a cost-effective alternative to professional coatings like Cerakote. The majority feel that it delivers adequate performance for the price, especially for DIY projects.

Sort by Filter by rating

Works like a charm

I read through pretty much every bad review about this product and will admit that I was a bit hesitant. But my buddy and I went ahead a bought a can to finish our 80% lowers. I roughed mine up with 100 grit sand paper and then cleaned it with brake cleaner and let it dry. I shook the snot out of the can like the instructions said and began to spray. It went on like a dream. It is in the mid 80's here today. I hung my lower in the shade on the back porch and made light passes making sure to start and stop off the lower. The first coat looks great. We will see how it holds up in the long run but for the price this can't be beat. I highly recommend this product. Just make sure to follow the directions and you'll get great results.

Best to follow directions

Can should be warmed in the sun, used a cheep lazer temp gun and got spray to 95. Also prep is very important, can't be stressed enough, how clean and oil free the part is will decide outcome of the job, you rush it and it will not turn out right, used astone as final wash and air blasted it the made sure part was warm, only had to flush out nozzle out 1 time recommend you start spray before the part to control spatter. Coating went on like a dream and I allowed it to flash off in the sun, 1 hour then baked in oven for 1 hour at 300 and shut off heat, then cool for 1 hour, stuff is amazing, chip resistance is off the charts, great product when used correctly. Five stars.

Good stuff

Used this product as an added coat of protection and for concealment purposes. Does a fine job but with rough use even when baked it will need a touch up before next hunting season. Good stuff for the money!

great buy

the product is great you will have to get replacement nozzles, and don't worry the nozzles are easy enough for a monkey to replace. My cans didn't jam until the 3rd project which was separated by a few days. Make sure your weather is hot(90 degrees or higher) or use appliances to heat can. bake the rifle in your loft or shed for 7 days atleast. You don't even need to wait between coats. I sprayed all my coats back to back. Just make sure to go from light to dark(light is your base coat), large areas of each color to break outlines at a distance as well as patterns in each color to break outlines up close. Use live vegetation for camoing your equipment. make sure you have somewhatof an artistic sense. you might not like your gear afterwards because your artistry sucks but not because the paint sucks.

Great Color Match

They reworked this color and it looks great. It matches my FDE Magpul PMag and my MFT Scorched Dark Earch buttstock very well. Order the extra spray tips, as this stuff is thick and will gunk up after about 5 min of spraying on and off.

BEST COATING EVER!!!

This coating is one of the most durable finishes ever. As a certified gunsmith I can tell you that most of my customers after seeing the results have done away with conventional blueing. If you apply Aluma II by the instructions it will be flawless protection. One of its many great qualities is no more rust! Plus if scratched one touch up spray in the damaged or scratched area and good as new. As far as solvents damaging the coatings, I have yet to see any problems in the last 4 years. As far as con's? There aren't any. Just be sure to shake it more thoroughly than instructed and FOLLOW THE INSTRUCTIONS. THANKS BROWNELLS.

very good product

I've been buying and using this stuff like water. Not really water, but close. Having to constantly shake the can is a real PITA, and so is clogging nozzle... But the stuff looks great and is somewhat durable.

Pretty good match for an M16A1

I used this to coat a commercial A2 receiver for a lower budget M16A1 retro build. I'm very happy with the results. The color isn't perfect but it's pretty close and it's hard to match these varying colors of the original rifles anyway. Very easy to put on. Get the TCE cleaner when you order and some extra nozzles. Remove and clean the nozzle in acetone after coating.

Very good match for Magpul FDE

I used this to coat the upper receiver of a Magpul FDE build using a Tennessee Arms FDE lower receiver. I'm very happy with the color match all around. It looks so much better now that the black receiver is gone. Get the TCE cleaner when you order and some extra nozzles. Remove and clean the nozzle in acetone after coating.

Matte finish

Great product have bought several and have ordered for a friend & will continue to tell others about it.