STRIKE INDUSTRIES - AR Anti-Walk Pins

I like these better than the button head screw type. They do not come loose and do not protrude as much. When installing them make sure that the ends with the slots are both on the same side and lined up properly They have to be 90 degrees to each other. I install the closed end of the plate to the hammer pin first. Ten rotate it down to the trigger pin. While keeping light pressure downward on the plate rotate the trigger pin with a wrench or needle nose pliers until you feel the open end of the plate click into the grooves. I then seat it by tapping on it with a nylon punch to snap it over the pin.

No problem installing, took all of 10 minutes. Haven't had any problems noted by other user. Will give 5 stars unless something changes. Good value for the $

These are an essential part of every build for me. The pins are held tight in place by a spring steel keeper, and there are no screws to come loose or that require thread locker. They can be installed lickity-split and dont require tiny little machine screws or allen wrenches that are hard to keep track of. It takes a little finesse to get the keeper in place, but once they are in, you never have to worry about them again! These will keep your most coveted lowers running for generations to come!

Great design, simple to install, and well made. I now have these on every ar platorm i own as well bought several more for future guns. Iv used another style but prefer the ease of this design and its strength. I use them even in my drop in triggers as a back up even with the tension screws built into the drop ins.

Excellent pin set, you just have to pay attention to detail. The pins lock into the slots on the retainer bar via 2 small grooves on the end of the pin. If these are lined up properly you will have no problems getting them to snap in. I used a small set of pliers and pinched the bar and pin together gently and rotated the pin until I could see and feel the bar drop into the grooves, then I applied more pressure and snap!