MDT - MDT 17S GRND-POD WITH AREA 419 ARCALOCK CLAMP

Versatile and Modular Brownells Exclusive 17S GRND-POD Bipod

The MDT GRND-Pod (pronounced "Ground-Pod") was developed for the shooter wanting a stable and secure platform to shoot off of without breaking the bank. This Brownells Exclusive model is designed to fit the popular A.R.M.S. 17S interface allowing it to be used with all the 17S interface options from QD Picatinny to ARCA/RRS 1.5” Dovetail rails. The bipods offers shooters a one hand adjustable height range from 4.5"-9", with 4-locking positions in the 0°, 50°, 90° and 180° positions. The MDT GRND-Pod legs are also Atlas/Ckye-Pod foot compatible and can be fully extended just by pulling down on the legs in any position!

FEATURES

• Height adjustable from 4.5" to 9.0"
• Locking Leg positions at 0°, 50°, 90° and 180°
• Footprint/Width: 7.9" - 10.9"
• CKYE-POD/Atlas foot compatible
• Made from 6061-T6 Aircraft Grade Aluminum, Carbon Fiber and High strength polymer.

The Area 419 Arcalock Clamp for the Atlas and Harris Bipods feature a proprietary two-stage screw design. This clamp works on all standard Arca/1.5” Dovetail Rails. The clamping screw features two different thread pitches.

The coarse 16tpi is used when no tension is on clamp, allowing rapid movement of the clamp vs others on the market. With high speed comes low torque though, so to counteract this as soon as the clamp sees tension it will switch to the 32tpi threads in the knob to give you extra torque when not using on an ARCALOCK rail.

• Clamp and knob machined in house from 6061-T6 Aluminum
• Screw is turned from 303 Stainless Steel
• Type III Hardcoat Black anodized clamp and Gold anodized knob

A 1/4 turn releases the clamp from the detents on the ARCALOCK rail for movement. One turn releases clamp to be removed from rail. The clamp directly bolts to Atlas Bipods using their factory hardware. The barricade stop can either be standalone on the clamp using provided hardware, or sandwiched between an Atlas bipod (Barricade stop does not work with Harris Bipods). The clamp is backwards compatible with standard ARCA rails by removing the two pins, and will still work this way to give you infinite sliding adjustment on the ARCALOCK rail. Moving side of clamp is dovetailed on both sides to prevent tilt.

This unit comes with two 10-32 tpi screws for mounting the items.