CERAKOTE - CERAKOTE OVENCURE REFILLS

We use Cerakote quite a bit.

They had it in stock and got mine order quick and pack well.

Great results when properly prepped and applied. Very pleased with the finished product.

Put this on a customer's Remington 870 that he was setting up as a home defense gun. He brought in the new "furniture" when he picked up the gun. the Magpul FDE Cerakote was a perfect match to the Magpul for-end and buttstock. I follow the Cerakote instructions exactly, and get great results. If you don't have the blast cabinet, solvent soak tank, and a good low pressure spray gun, take it to someone that does.

this is what i got to do a 80% lower receiver that was ordered in raw aluminum. blasted it with the specified media, soaked in rubbing alcohol a few times, wiped down before coating with the ceramic & turned out great. 99% of success will be in the prep work; do not cut any corners here. spray it inside a clean environment, bake in oven for the suggested time & temp and all will be good. the finish on the lower has not chipped or rubbed off. the coating is super thin and will not add thickness if you are concerned with tolerances. im surprised how well the finish looks & performs. i have put the finished lower in cases for travel, set it down against various surfaces, heated it up numerous times trying to extract a screw for the bolt catch, and fired 300 rounds or more over a period of 6-months. take your time, follow directions and prep surfaces well and you will also be impressed. it takes a minimal amount to cover 1 or 2 receivers so i still have enough left over to coat anything firearm related or otherwise. and this is just a refill pack. great for small jobs just mix a little at a time given scope of the work, dont mix the entire contents at once and then waste 98% of the leftover. use common sense & mathematics to ration off what is necessary for your needs at that time.