BROWNELLS - STOCK REPAIR PIN KIT

With the Brownells Stock Repair Pin Kit, Acraglass and a variable speed drill, you can do quick, easy, sure-to-hold repair jobs on cracked or broken stocks. Pins go in easily and won't further split the stock. The pins cannot pull or shoot out and can be cut off at any length. Made of "half-hard" brass alloy with 60° flat-top threads for best holding. To use, coat broken or split surfaces with Acraglas and tightly clamp them together. Next, drill a pin hole with drill provided. Coat the pin with Acraglas and run it into hole with variable speed drill at slow speed. After the Acraglas has cured, cut off the excess pin protruding from the repair and dress the ends.


The Stock Repair Pin Kit comes with twelve 3/32” pins, twelve 1/8” pins, 1/8” diameter jobber length drill bit, and a 3/32” diameter jobber length drill bit

3/32” Stock Repair Pin dimensions: 2-1/2” overall length x 3/32” diameter

1/8” Stock Repair Pin dimensions: 2” overall length x 1/8” diameter