Don't hesitate to buy this!
I originally bought a single bullet press, then moved up to a Lee turret press, and now I've moved up to this. I love the positive lock in place action for each station. That was the downfall of the turret press. Most the time it would work good but occasionally it would be off just enough that you would have to manually adjusted back to the correct spot for the next die. As long as you do a complete stroke on this press you will never have a problem. If for some reason you partial stroke and it doesn't feel right don't continue to move the lever or you're probably going to break something. The easy fix is to have the handle at about 3/4 stroke down and manually rotate the shell plate till it clicks into place in the correct spot. I discovered this as I was fully around with it when I was setting it up. If you do that it will line up correctly for each die again and you won't have any issues. No I didn't break anything, but you could feel that the stroke just wasn't quite right because I didn't do a complete stroke up or down. So far I've done about 500 rounds of various calibers and it works great.
