DILLON PRECISION CP2000 CASE PROCESSING MACHINE
Designed to complement Dillone Precision’s RL1100 and Super1050 reloaders, the CP2000 offers higher speed, greater versatility and added case processing capability...all at a much lower cost than dedicating a RELOADING machine to prep brass! If you're loading mass quantities of ammo, the CP2000 will make your task much easier.
The CP2000 comes with a two-year limited warranty against manufacturing defects.
NOTE: The CP2000 is to be used in conjunction with a reloader to speed up the reloading process. Traditionally in the past, another reloader was used for case processing, they now offer this dedicated machine to serve that purpose.
NOTES:
- Caliber Conversions & Casefeed Plates sold separately
- Machine in photo is shown with options – select options during configuration
- CP2000 comes standard with Large & Small Primer Swaging Parts
THE BASE MODEL CP2000 INCLUDES:
- Built in Primer Pocket Swager
- Electric Casefeeder – (Order Casefeed Plate as Option)
- Standard Toolhead
- Shellplate Auto-Indexing
- Large & Small Primer Swager Kit
ELECTRIC CASEFEEDER:
The CP2000 uses a variable-speed, universal voltage casefeeder. The speed of the casefeeder is controlled by a potentiometer on the casefeed funnel. It allows you to infinitely regulate the speed from 0 to 8 RPM. Adaptable to either 110/220V , 60/50 Hz – adaptors included.
REPEATABILITY AND EFFICIENCY
The CP2000 is intended to produce large quantities of cases to speed up your reloading. Whether loading rifle or handgun ammunition, the CP2000 will keep you well supplied, without using up all of your free time.
FEATURES:
- Eccentric Roller Bearing Drive System
- Smoother Operation, Less Effort
- Higher Throughput, Lower Cost Per Case
- Heavier Frame for Greater Rigidity
- Seven Threaded Stations for More Flexibility
- Upgraded Primer Pocket Swager
- Primer Pocket Swage Available in Two Stations
- User-Replaceable Swage Rod Tip (Two-Year Warranty)
- Reinforced Toolhead Bolt & Washer
- Improved Shellplate Indexing System
- Processing Speed up to 2000 Cases per Hour
- One-Year Warranty
- Rifle and Pistol
- Pairs perfectly with the DA3000 Auto Drive & Preserves Warranty
- Primer Swager Size:
- The CP2000 now comes with both small and large primer swager sizes so no need to order one or the other.
CALIBER CONVERSION:
- A Caliber Conversion Kit is required. Select based on cartridge type from the configuration menu.
CASEFEED PLATES:
- A casefeed plate is required.
DIES:
- The CP2000 is a case preparation machine only - it does not require standard reloading dies. Universal Depriming & Expander Dies are available as options in the configuration Menu.
MINIMUM ACCESSORIES RECOMMENDED:
- Caliber Conversion Kit (not included with base unit)
- Die Set (not included with the base unit)
- Caliper
- Case Lube (for bottleneck cartridges)
