LEE PRECISION - BUCKSHOT MOULDS

Absolutely perfect mold. I completely covered my mold with Dry Molly Spray Lube and the pellets just drop right out. The pictures I posted are showing the process of how they come out of the mold, then after you clip them apart which I use pets nail clippers, then after you tumble them for 10-12 hours. After you tumble them they come out almost EXACTLY 0.30" which is amazing. The picture of the 2 different buckshots is a comparison of the #1 buckshot from this mold after tumbling, compared to the B.A.M. #4 Buckshot from 'BallisticProducts'. I simply used the most basic and cheap lead I could fid, and dropped it into a bucket of water out of the mold, and it is some HARD stuff. 11/10 product. Will be buying every caliber I can find over the next year. Great job LEE! And THANK YOU BROWNELLS!

Got this #4 and the #00, and broke em out the other day. I left a review on the #00 and like that one this #4 mold likes to be HOT before it starts giving you full 18 cavity fill. Your first few pours(I use a Lee magnum melter with a Rotometals 2 pound bottom pour ladle) will only fill out the top 6 cavities and leave goofy tear drops in the 2 row of cavities, just keep going and going. Once it heats up itll start filling all cavities, and once it does it doesnt take long for the shot to add up. The evening I had this out, I also had the #00 and the Lee 7/8oz slug mold out too. I was rotating through the three molds swapping whenever one started getting TOO HOT. So just in one evening of casting, I got about 4 pounds of #4 shot, about 4 pounds of #00 shot, and A LOT of slugs made. Im set for a bit. Great molds, just make sure you lube all that needs lubed on these molds, I use permatex anti-seize lube, because these Buckshot molds like working HOTTT!