LABOR DAY DEALS START NOW!
Exclusive Offers + 12% Off Almost Everything Else Use Code: LABORDAY12

LABOR DAY DEALS START NOW!
Exclusive Savings + 12% Off Almost Everything Else Use Code: LABORDAY12

SAVAGE ACCUTRIGGER TRIGGER

SAVAGE ACCUTRIGGER TRIGGER Reviews & Ratings

The Timney Featherweight Triggers for Savage Accutriggers are precision machined and hand-fitted to provide a crisp trigger pull. They feature a lightweight alloy housing with machined and hardened steel working surfaces. The trigger is fully adjustable. The trigger pull weight is adjustable from 1.5 to 4lbs. and is adjustable for creep and overtravel.

  • Adjustable
  • Pull weight 1.5-4lbs.

Minor fitting may be required


SPECS: Fits Savage Accutrigger rifles. Will not work on the Savage A17 rifle and Accutrigger. Adjustable from 1.5-4lbs.


View Product
Write a review
Reviews Summary
Customers are impressed with the SAVAGE ACCUTRIGGER TRIGGER, highlighting its superior performance compared to factory triggers. Most users found installation straightforward, though some needed to make minor modifications to their rifles for optimal fit. While many appreciate its crisp pull and adjustability, a few encountered minor adjustment issues, which they overcame successfully.
What Reviewers Are Saying
Installation and Adjustment
70%
Reviewers commonly mention the installation process is relatively straightforward, with clear instructions provided. Many users noted that modifications, such as Dremel work, were necessary for a perfect fit, but they found this to be an acceptable trade-off for improved performance. Approximately 70% of reviewers discussed this theme.
Performance Enhancement
80%
The majority of users express strong satisfaction regarding the performance of the SAVAGE ACCUTRIGGER TRIGGER. They highlight the significant improvement in trigger pull compared to factory settings, with some achieving a pull weight down to 1.2 pounds. This enhancement is a primary reason for their recommendation. About 80% of reviewers mentioned this improvement.
Customer Expectations
60%
Several reviews reflect customers had certain expectations based on other products and previous experiences. Some were initially skeptical about the 'drop-in' claim, but most were pleasantly surprised by its actual performance. The adjustments needed for their specific rifles, however, caught some off guard. About 60% of reviewers raised this theme.
Quality of Instructions
40%
The clarity of installation instructions received mixed feedback. While many found them helpful, a few reviewers suggested more detailed guidance could have alleviated common adjustment challenges. Some noted that prior knowledge from other reviews could have saved them time. Approximately 40% of users discussed the quality of instructions.
4
FITTING REQUIRED
Plan to do some Dremel work on the stock for clearance. Otherwise easy to install and better than factory. See other reviews.
4
Better than Factory
I had trouble adjusting my Timney Trigger 638 in my Savage 16 LWH (with Accutrigger). The firing pin would release when I closed the bolt. I fixed it by screwing the sear screw out to a half turn from firing-pin-release instead of the 1/6 turn as instructed. Also, I screwed the safety setscrew in until I felt resistance, then I backed it out by 1/4 turns until the safety started working correctly. I also modified the rear trigger guard screw mounting boss molded into the Savages stock to allow adjustment of the trigger pull force with the barrel and trigger mounted to the stock. I took about 1/8 off the top of the boss to clear the trigger pull force adjustment screw. There was interference between the Timney trigger and the top of the Savage trigger guard, keeping the pull force from being consistent. I removed the Timney trigger and ground clearance on the bottom front corner of the Timney trigger and shortened the sear screw by 0.050 allowing it to be a little below flush (and not interfere) when correctly adjusted, and polished the business end of the setscrew. All now works well, including a consistent pull force of 1.2 pounds. Much better than the factory trigger.