308 AR V2 EXTENDED BOLT RELEASE Reviews & Ratings

Extended release lever speeds magazine changes and enhances the shooter’s ability to clear jams, double feeds, and malfunctions quickly and safely. Lets you catch and release the bolt with the trigger finger inside the triggerguard, instead of with your off hand. Push upward on the lever to lock the bolt rearward; push lightly downward to release it. Both operations can be performed without removing your hand from the pistol grip. EBRv2/308 is the same low-profile, drop-in replacement for the factory release on all models of the DPMS LR-308 series of AR-style .308 rifles, as well as the Remington R-25 in .308, .243, and 7mm-08.

Not compatible with Armalite and DPMS Gen 2 style rifles

SPECS: Machined steel, matte black finish. 2 1/4" (5.3cm) long. 1/2 oz. (14g) wt.

View Product

Write a review

Reviews Summary

The '308 AR V2 EXTENDED BOLT RELEASE' is praised for its solid build and improved ergonomics, enhancing convenience across various AR platforms. However, some users experience inconsistencies in reliability and require modifications for proper installation. While many appreciate its performance, others face fitting challenges, which can be a drawback for non-standard lowers.

What Reviewers Are Saying

Product Quality

65%

Many reviewers highlight the solid build quality of the bolt release, describing it as well-manufactured and durable. The one-piece design is noted for improving ergonomics and functionality compared to competing products, with around 65% of users mentioning its quality positively.

Ease of Installation

60%

Installation experiences vary by user, with about 60% reporting ease of installation. However, some needed to modify their lowers for a proper fit. While many found it simple to install, others faced challenges requiring tools and adjustments, showcasing a mixed sentiment about this aspect.

Fit and Compatibility

50%

Several reviewers note issues with fitment, especially on non-MIL spec lowers. Approximately 50% of users encountered complications that necessitated modifications for the release to function correctly, indicating that compatibility can be problematic depending on the rifle configuration.

Reliability Concerns

40%

Some users expressed disappointment with the reliability of the bolt catch, with reports of inconsistent performance in locking the bolt back. About 40% of reviews mentioned issues related to the reliability of the product, which impacts overall satisfaction.

User Experience

70%

User satisfaction is reflected in the high praise for the product’s convenience and efficiency, with around 70% of reviewers finding it enhances overall functionality. Many enjoy the use of the lever, leading to its installation on multiple firearms, which indicates a positive reception despite the mentioned issues.

Sort by Filter by rating

Not the best

I like the idea and looks but they are hit or miss as to working properly .I think the mass of weight is just to much for it to lock quick enough on last shot to lock bolt back .

Need some tweakng

Installed it on cmmg lower dpms upper. Installation went smooth at first. Pulled back on my charging handle and would not catch the bcg. I noticed that the left side of the bolt release ( vertical part ) was rubbing against the lower. I had to file / sand down the sides of the bolt release quiet a bit to clear the lower. It works fine now but the strength / integrity of the bolt release has been compromised a little. I would still use this set up on my gun...still beats the standard release.

Not like its sibling

Unlike their AR-15 model (100-004-899) this didn't work for me so well. First, it's not one-piece machining, but rather a cut-down regular bolt catch with the extension welded on. Second, and the most important point, is that without modification this device would not hold the bolt open on Armalite AR-10. Looking at the original and this catch side by side it becomes obvious that the dimensions are different -- the extended catch is smaller vertically. As it appears that this device is made from an existing bolt catch, it must be from some other model, not Armalite's. From another review it seems that it's not DMPS either. I finally made it work by enlarging the roll pin hole to about 1/8". It was a tedious process even with a carbide bit, because the part is made from hardened steel. I still recommend it though, as there is no alternative on the .308 platform. This kind of device improves ergonomics tremendously.

model spec. fit

Installed on a dpms .308 and it would not hold the bolt open. Then installed on a mega mono upper and it work perfectly.