1911 TRIGGER Reviews & Ratings

1911 TRIGGER

Precision-machined, curved shoe with a finely serrated surface provides good feel and trigger control. Shoe height is slightly oversized for precise fitting. Stainless steel bow gives smooth, no-flex trigger movement. Overtravel stop screw prevents creep.

Available with Solid shoe in short length or Drilled, 3-Hole shoe provides an even lighter trigger pull; long length only.

SPECS:

Aluminum, silver anodized shoe; polished stainless steel bow.
Shoe – 1/4" (6.3mm) wide, 15/16" (23.8mm) high.
Overall length measured from center of shoe to end of bow.
Short – 2.05" (5.2cm) OAL.
Long – 2.24" (5.7cm) OAL.
Gunsmith fitting required.

View Product

Write a review

Reviews Summary

The Ed Brown 1911 trigger garners mixed reviews, praised for its quality and smooth operation but often criticized for the need for extensive fitting and occasional manufacturing defects. While some find it an excellent upgrade, others experienced issues with fit and craftsmanship, leading to frustration and dissatisfaction. Overall, it heads toward a match-grade product with a few caveats to consider.

What Reviewers Are Saying

Fit and Adjustability

65%

A significant theme among reviewers is the need for fitting and adjustments to install the Ed Brown trigger properly. Many noted that while some fitting is expected with match-grade parts, several reviewers expressed frustration with excessive work required to get the trigger fitting correctly. This resonates with approximately 65% of reviewers.

Quality and Craftsmanship

40%

Opinions on the trigger's overall quality vary notably. While some reviewers lauded its construction and performance, others reported issues such as poor machining and misalignment. This dissatisfaction with craftsmanship is noted in about 40% of the reviews, suggesting inconsistency in quality.

Installation Ease

35%

Several users mentioned that installation could be straightforward, provided one is mechanically inclined and willing to do minor filing. This aspect is deemed a positive feature by approximately 35% of reviewers, reflecting a balance between ease of use and the required knowledge for fitting.

Performance

50%

Once fitted correctly, many reviewers praised the trigger for enhancing pull quality and overall firearm performance, being crisp and smooth during operation. This positive reception for performance can be attributed to around 50% of users after successful installation.

Value for Money

30%

Despite mixed reviews on fit and quality, several customers feel the Ed Brown trigger is a good value, especially when compared to similar products. Many recognized satisfactory performance relative to the price paid. This sentiment is expressed by roughly 30% of reviewers.

Sort by Filter by rating

Can Anyone Make a Consistantly Good Trigger Bow?

I've built a few 1911s and used different triggers in them and one thing I've discovered is that no one seems to be able to make a consistently good fitting trigger Bow. My latest build i purchased an EB trigger and was immediately pleased that the bow fit perfectly. I've had others, bought in pairs from namebrand makers that either wouldn't fit or needed tweeking to fit. No 2 seem alike. The shoe needed some fitting as I expected , top, bottom and sides. My disappointment came when, after doing all that fitting and assembling the gun, I found the bow was a tad too long and wouldn't allow proper grip safety function. Not sure at this point if I'll continue on with this part. Very disappointing as I've used other EB parts before without complaint

Not oversized enough

Was not oversized, fit right into my Springfield 1911A1 frame. It's a disappointment because I wanted to fit it tighter, but it actually was not a terrible fit out of the bag. Overtravel screw is nice and tight and isn't gonna move on you. Corners of the trigger bow were kind of sharp, so make sure you break those edges. Would not buy again, but too lazy to send it back.

by Pub on December 31, 2024

Verified Purchase

Was this review helpful? 0

Could have been better - affordable

Nice fit and finish except the screw was really undersized! I tried lock tite but ultimately had to take it back apart and crush the back of the aluminum trigger to stop the screw from walking in and out. The other thing I didnt like was no wings to adjust the pretravel like on Wilson Combat triggers and so many others but hey it was affordable.