1911 TRIGGER Reviews & Ratings

1911 TRIGGER

Precision-machined, curved shoe with a finely serrated surface provides good feel and trigger control. Shoe height is slightly oversized for precise fitting. Stainless steel bow gives smooth, no-flex trigger movement. Overtravel stop screw prevents creep.

Available with Solid shoe in short length or Drilled, 3-Hole shoe provides an even lighter trigger pull; long length only.

SPECS:

Aluminum, silver anodized shoe; polished stainless steel bow.
Shoe – 1/4" (6.3mm) wide, 15/16" (23.8mm) high.
Overall length measured from center of shoe to end of bow.
Short – 2.05" (5.2cm) OAL.
Long – 2.24" (5.7cm) OAL.
Gunsmith fitting required.

View Product

Write a review

Reviews Summary

The Ed Brown 1911 trigger garners mixed reviews, praised for its quality and smooth operation but often criticized for the need for extensive fitting and occasional manufacturing defects. While some find it an excellent upgrade, others experienced issues with fit and craftsmanship, leading to frustration and dissatisfaction. Overall, it heads toward a match-grade product with a few caveats to consider.

What Reviewers Are Saying

Fit and Adjustability

65%

A significant theme among reviewers is the need for fitting and adjustments to install the Ed Brown trigger properly. Many noted that while some fitting is expected with match-grade parts, several reviewers expressed frustration with excessive work required to get the trigger fitting correctly. This resonates with approximately 65% of reviewers.

Quality and Craftsmanship

40%

Opinions on the trigger's overall quality vary notably. While some reviewers lauded its construction and performance, others reported issues such as poor machining and misalignment. This dissatisfaction with craftsmanship is noted in about 40% of the reviews, suggesting inconsistency in quality.

Installation Ease

35%

Several users mentioned that installation could be straightforward, provided one is mechanically inclined and willing to do minor filing. This aspect is deemed a positive feature by approximately 35% of reviewers, reflecting a balance between ease of use and the required knowledge for fitting.

Performance

50%

Once fitted correctly, many reviewers praised the trigger for enhancing pull quality and overall firearm performance, being crisp and smooth during operation. This positive reception for performance can be attributed to around 50% of users after successful installation.

Value for Money

30%

Despite mixed reviews on fit and quality, several customers feel the Ed Brown trigger is a good value, especially when compared to similar products. Many recognized satisfactory performance relative to the price paid. This sentiment is expressed by roughly 30% of reviewers.

Sort by Filter by rating

Absolute junk!!!

I have used edbrown parts in the past and have never had a issue. I have now order two of these for the same job and the trigger bow on both are not even making it so the trigger will not go in the guns straight up and down. Because of this you cannot even get all of the way into the gun. And it is dramatic enough that you can visibly see that it is canted. I would not wast my time or money with Ed Brown parts again.

Shoe not Oversized According to my Print

This trigger shoe is not oversized, the print for a 1911 calls for a trigger shoe height of 0.930" -0.010. This trigger shoe measures 0.922" which is the low side of specification. Ed did not even dispute the blue print specifications. I also have a blue print that shows the trigger track for a 1911 is 0.925" 0.010 which means the track can be as tall as 0.935". "1516" (23.8mm) high" is what is advertised on Brownell's website which is 0.9375". This would be perfect and oversized. I contacted Ed Brown and this is what I was told in an email "Ours are .922. The print you sent shows .930 less .010 as the spec, that means between .920 and .930." "1516" (23.8mm) high" is what is advertised on Brownells website which is 0.9375". This would be perfect and oversized. This is on the website description from Ed Brown Ed Brown Trigger The classic three hole design long trigger made from strong yet lightweight aluminum, with heat-treated steel bow. Manufactured in-house by Ed Brown. Finely serrated pull surface for better feel and control. Includes stainless steel adjustable overtravel set screw. Slightly oversize in height for precise hand fitting to your frame.