Trijicon night site
Second one from Brownells. As expected. Nice price. Great company.
Would you recommend this?
Yes, I would recommend to a friend
Trijicon tritium sights
This is my 4th set of Trijicon sights. These sights work well at day and night for me.
Would you recommend this?
Yes, I would recommend to a friend
Trijicon Bright and Tough and Brownells!,
Great product and superb shipping time, thanks for both!!
Brought my Glock 20 back to life!
My Glock sight tool only works with the smaller slides. So I soaked the old rear sight in Kroil overnight. Drifted out easy then. Replaced it and the front sight. (With the appropriate nut driver). But, with the right tools a very easy job. And a huge improvement in sights! Good for another 12 years!
Trijicon low profile
Perfect fit on Glock 43X. Easy install and perfect height Would buy again. No cons.
Solid, Cheap - Wrong Description however
Brownells has the wrong description. I put this on my Glock 19 Gen 3. The following is from Trijicons website: GL05 (600234) Fits Glock Models: 17MOS, 19MOS, 34MOS, 17, 17L, 19, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38 and 39.
Look great and very bright
Use a sight pusher to instal. I used what I had in the shop ( a vise, punch and hammer) and damaged the finish slightly. If your front sight isnt strait you can hold it strait while you snug it down, I used a quarter inch drive deep well socket. Be careful not to over tighten it. I seen people using a pair of pliers on the internet and that seemed goofy. I used this product to replace Glock factory plastic sights on a cc pistol and the new replacements arent to bulky, they don't cause extra drag on clothing or look out of place. 100% would recommend.
Quality product
Replaced the Glock factory night sights that had lost their glow. Found out that both bits I own for the front sight screw will not fit due to factory location. The Trijicon screw is in the middle of the oval slot instead of at the very front as the factory brand. As another reviewer stated there is some looseness in the fit. As loctite was/is used, simply add a drop into the oval with the sight centered and tighten the screw making sure it stayed centered. Once it sets up its not ever going to move. Definitely use a sight pusher for the rear, which did require some minor fitting, so as not to damage the tritium tubes. Quality product as expected.
An excellent, high quality product
I have this same set of sights on all of my Glock pistols. I've tried the Meprolight sights and found that the sight picture of the Trijicon brand to work better for me. I have five Glock pistols and each one has the same trigger pull and the same night sights.
Green is Go
If you have the sight mover & don't try it without the mover, the sights do their part. Good workmanship in the sights, front & rear, and for Glock lovers, it is the cat's meow. lcj
