Brush Walker
10 rd mag just like my SK but in 30.06. I seen no need for tha scope on it , therefore I took it off. Hence tha name bushmaster. Should have named tha rifle tha Buck Knocker. Put em in tha dirt at 100 yds.
Would you recommend this?
Yes, I would recommend to a friend
Best accessorie
The cheapest and highest horsepower AR platform out there that people have forgotten about. Loaded up with 125gr ammo the Remington 7400 can do some reasonable scooting! The poorman AR.
Bob
They work great for not being Remington Mags!!!
10 round magazine
Really fasting shipping, product works great. Slides in and out of gun way easier than the 4 round stock clips. Perfect spring tension which aloud all 10 shots to fire with no signs of jamming. I would recommend it.
Review
It actually fits and so far it hasn't jamed up like I thought it would. Absolutely excited that I have an extra clip now!
Works better than OEMs in the 7600!
I took a gamble and this magazine DOES work in the 7600; long or short action, way better than the OEM 4 round magazines. I didn't know until I bought a long and short action 7600 that the magazines body (& receiver) is the same length for both. The short action has a stopper at the base end to keep the short action rounds closer to the breach. So, .308Win. (et al) will fit in a .30-06 magazine but, not vis-versa. These mags actually seat better. All the 4-round OEMs that I've used can seat above the mag catch and stop the 7600 bolt from running. Some OEMs will seat one end above and one end below and make for a real train-wreck to remove. THESE DO NOT. They slap-in and seat perfectly with out having to "feel it out". As others have pointed out these DO have a "hold open" on the follower. I don't see this as a problem, having run an AR extensively.
Just got the clip and it fits good
Just got it and it's easy to load. Great price. Haven't shot any shells out of it, but seems to be made of good quality. I do alot of deer hunting and target practice.
Magazine 30-06 Springfield 10rd Steel
I have been using these magazines for my Remington 7400 30-06 and Remington 750 270 and enjoy everything about them Strong and very dependable, priced right
Works in my 7400
Cycles good. On a side note if your 7400 is suffering from poor accuracy, make sure the front stock screw isn't tight. It puts tension on the barrel. I use locktight on mine to hold it in place.
So far so good
I purchased two of these for a 742 carbine I just inherited. Fully load both and cycled through all the rounds perfect with the exception of the last round of a mag did not fully chamber but simply pulling the charging handle back and letting it go chambered the round. I put about 50 rounds through the gun half of thouse being with these mags. So far these mags have been great and I will continue to use them for deer hunting unless they fail me in the field. These guns are notorious for jamming so I dont feel my failure to feed was a magazine issue.
