$0 Hazmat Fee On All Primer & Powder Orders
STOCK UP NOW!

$0 Hazmat Fee On All Primer & Powder Orders - STOCK UP NOW!

Flash Sale - 15% Off All Magpul Stocks, Mags & Accessories!

RECEIVER MOUNT SHOTSHELL HOLDER Reviews & Ratings

Rugged and lightweight, aluminum shell holders put extra 12 gauge shotshells on the left side of the receiver for fast tactical reloads. Shells are held in place with a unique, internal Santoprene™ elastomer rib that securely retains even heavy slug shells during vigorous movement or heavy recoil. Available in sidemount (SM) or Picatinny rail (PR) configurations. All necessary installation hardware, tools, and instructions included. Remington Sidemount is available in 4-, 6-, and 8-round capacities and uses steel-on-steel, threaded adapters that replace the trigger group pins to anchor the shell holder securely to the receiver. Remington 870 shotguns require a shortened, tactical-style forend to accommodate 6- and 8-round sidemount units. Remington 1100/11-87 require minor forend alterations to fit the 8-round model. Remington Picatinny is a 6-round model that features an integral Picatinny rail for mounting sights, optics, or other accessories. Wraps around the top and mounts to both sides of the receiver using the same type of attaching system as the sidemount model. Fits Remington 1100/11-87 without modification; requires use of shorter than factory length forearm when used with Remington 870. Mossberg Sidemount is a 6-round unit that attaches in the same manner as the Remington Sidemount. Fits Mossberg 500/590. Mossberg 500 Sureshell Carrier attaches to top mount. Benelli Picatinny models include an integral Picatinny rail and mount to the top of factory drilled/tapped receivers. Available in 6-round for Benelli M1/M2 (requires drilling/tapping receiver for M1), 6- and 8-round for M4/M1014, and 4-round for Supernova shotguns. Mossberg 930 sidemount attaches to the left side of the receiver. Mossberg Picatinny is a 6-round model that features a top Picatinny rail and attaches the same as the Sidemount model. Versamax is a 6-round model that features a top Picatinny rail and attaches to the receiver.

SPECS: 6061 T6 aluminum, anodized, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 4-Round Sidemount – 5ј” (13.3cm) long x 1Ѕ” (3.8cm) high. 3.9 oz. (111g) wt. Rem 6-Round Sidemount – 6ј” (15.8cm) long x 1Ѕ” high. 5.4 oz. (152g) wt. Rem 8-Round Sidemount – 7ѕ” (19.7) long x 1Ѕ” high. 7 oz. (200g) wt. Remington Picatinny fits models 870/1100/11-87 (may require modification to gun). 7” (15.8cm) long x 2Ѕ” (6.3cm) high. 7.6 oz. (215g) wt. Mossberg fits models 500/590. 6-round ony. 6-3?8" (16.2cm) long x 1-3?8" (3.5cm) high. 5.2 oz. (147g) wt. Benelli Sidemount fits M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) long x 2Ѕ” high. 6.3 oz. (179g) wt. Benelli 8-Round Sidemount – 7ѕ” long x 2Ѕ” high. 8.1 oz. (230g) wt. Benelli Picatinny available for M2 (requires drilling tapping reciever to fit M1), M4/M1014, and Supernova. Benelli M2 6-Round Picatinny – 6” long x 2 (5.1cm)” high. 7.4 oz. (210g) wt. Benelli M4/M1014 6-Round Picatinny – 6” long x 2” (5.1cm) high. 7.5 oz. (213g) wt. Benelli M4/M1014 8-Round Picatinny – 7ѕ” long x 2” high. 9.5 oz. (268g) wt. Benelli Supernova 4-Round Picatinny – 8” (20cm) long x 1ѕ” (4.4cm) high. 6.2 oz. (176g) wt.

* Requires use of shorter forend on Rem 870.

+ Requires minor forend alterations to fit Rem 1100/11-87.

** Requires drilling/tapping receiver to fit M1.

View Product

Write a review

1 Stars

Reviews Summary

Most reviews praise the RECEIVER MOUNT SHOTSHELL HOLDER for its robust construction and ease of installation. Many users liked its solid retention and tactical benefits, though some noted downsides, such as sharp edges, quality control issues, and not being suitable for long-term shell storage. Overall, it’s considered a valuable upgrade for shotguns when quality is a priority.

What Reviewers Are Saying

Product Quality

68%

The shotshell holder is widely recognized for its high-quality materials and solid construction. Reviewers appreciate the durability and the significant enhancement it provides to their shotguns, reinforcing confidence during use. A majority feel that while it might be priced higher than other options, its performance justifies the investment.

Ease of Installation

75%

Many users find the installation process to be straightforward and quick, often requiring no special tools. Reviews indicate that clear instructions are given, although some recommend watching installation videos for added clarity. The ease of installation contributes to a positive user experience.

Shell Retention Concerns

40%

While the shell holder is praised for holding shells securely during operation, several users raised concerns about long-term shell storage potentially leading to retention issues. Some reviews specifically mention that shells may loosen over time, which could be problematic for home defense scenarios.

Design Flaws

30%

Some reviewers voiced dissatisfaction with the product's design, citing sharp edges and compatibility issues with specific shotgun models. Moreover, several noted that the instructions and manual could benefit from clarity improvements. These design flaws somewhat temper the overall positive feedback.

Customer Service Experience

20%

Customer service experiences varied among reviewers, with some finding the support helpful and responsive, while others experienced delays in getting assistance or replacements. This inconsistency highlights the need for improved customer support from the manufacturer.

Sort by Filter by rating

Works perfectly

This is a great product. Easy to install and works perfectly. If you are looking to add a rds and side saddle to your shotgun this product is what you need.

Solid like a tank

I gave this 5 stars as the product itself is superb, install wasn't too bad, just needed to youtube an install video and double check the instructions. The adhesive backing and solid lockup of the chicago screws provide no wiggle at all, perfect. The only caveat is the example I purchased had some vertical lines/wear marks on the crest of shell holders, like they rubbed against something. Not a big deal as I intend to run my 870 for what it is, a home defender. As a nice surprise, an extra, stronger, retention tube is included which I intend to replace the stock one once it wears out.

Stunningly Well Designed!

As soon as you open the package you will be impressed with the design, craftsmanship and finish. Two levels of shell retention are available. It does require disassembly of the saddle to change the tension but the needed part is provided. Installed 1 on a Cruiser style 500 and a 2nd on a 590A1. The installation is the same for each model shotgun and is straight forward. Take a few moments to review the instructions. The needed hex head wrenches are included. The only thing you need to add is some blue thread locker. Rock solid after the installation is complete. A thin closed cell (neoprene?) self adhesive foam strip is included. It is applied to the carrier, protects the receiver and helps tension the mounting of the carrier. The following will make more sense once you have the unit in hand. Cut the strip to length as instructed but save the cut off end. Apply by centering the notches on the carriers phillip screw heads. Not mentioned in the instructions but I took the cut off end and shortened it further to fit opposite the carrier plate keyhole. Just a top notch piece of kit and I have other shell holders as comparison.

Awesome Product!

I bought this shell holder for my 870, it had gotten great reviews so I figured I'd try it out. Like everyone else, I'm thoroughly pleased with it, the construction is rock solid, installation was a breeze, and it holds the shells very securely. I have not had the shells in it long enough to notice any deformation of the retention tube, but they include an extra one just in case. I have another shotgun build that I'm planning, and will definitely be purchasing another one of these for it. Hope this helps!

Worth the Weight!

This carrier mounted seamlessly on the top of my M4 and looks like a Benelli option rather than a third party add on. As a left handed shooter I have no problems with the position of the assembly, but right handed shooters may not like the close proximity to ones face. Other than that, it makes speedloading a dream and the shells stay put whether you load them from the top or bottom. It comes with a spare retainer strip if you happen to wear yours out, but it isn't intended for long term shell storage. If you can tolerate a little extra weight then you will love this product!

Outstanding Addition

Absolutely a great addition to my 870, in less than five mins it was on. Very easy to install, and solid construction along with a the largest capacity that I have seen make it an awesome investment. Definitely increased the lethality of my home defense gun. Some may find it a bit expensive but when you want quality you pay for it, this is one of those times.

Great Product

In less than five mins I installed mine; it has a slim design and solid construction. Some may find it a bit expensive but you definitely get what you pay for with this carrier.

If you are going to buy one buy this one

I purchased the 6 round shot holder for my 870. Unfortunately my fore end got in the way and it would not cycle the action. (This was my fault I did not read there notes.) So I installed it on my tactical 1100 and it is Amazing. I am going to try and order a 4 shot one in hopes that it is short enough for the 870 to cycle. I like my fore stock and dont want to change or modify it.

Top-tier product

Easy to install, even for a novice gunsmith. Hold shells securely in both brass-up or brass-down positions. All metal, light, nice finish, comes with an adhesive-backed rubber pad to protect the receiver. Comes with tools. Not good for long-term storage of shells in the holder, however.

Simply the Best Shell-Holder

I've had this item on my duty shotgun for five years now and it's performed flawlessly. The 870 rides in my car every day and sees moderate continuous use. This shell holder is very durable and can be fully disassembled, including access to the replaceable shell tensioner (rubber tubing), which hasn't demonstrated a need for replacement as of yet, but could be performed very easily. Couple this with heavy duty mounting hex-head bolts, which effectively and securely couple the shell holder and trigger assembly to the receiver, and you have a rock-solid mount. Another nice feature includes a cut-out on the base of the unit, allowing one to read the serial numbers on the shotgun. This item may cost double the amount of the other ones, but it'll be the last one you'll ever need. Definitely worth it, and it's manufactured here in the USA.