Sling swivel
Small but mighty. Fit perfectly for sling termination at but stock. Thanks, Brownells!
Works perfect
Got this for beretta a300 patrol. The qd socket in the stock is super picky and I couldn’t find a qd sling stud that would lock. This fits nicely and looks good too.
Works Great
Installed to AR MFT stock to use adapt QD to loop for HK Sling Hook when I got a McClean Sling. This was an easy install, a bit odd because it has an angle to the screw adapter, but it works. Also isn't too large, probably the size of a quarter. Classic Magpul quality, good finish, Brownells Edge arrived within 2 days, would buy again.
Solid!
The three previous reviews pretty much say it all. Had some difficulty installing, but once I figured it out, its rock solid. As with all things Magpul, well designed and top quality!
Break in First
Works absolutely flawlessly, but only after you thread the screw in first. The lock-tite magpul uses makes it so the screw will turn the base (which is not supposed to move) out of alignment. If you thread the entire screw in first, then place it in the QD hole for tightening, it works much better. Still 5 stars
Another great option by Magpul
Solid lockup, solid steel material...cast melonite finished steel (doesnt feel like it will bend or break under hard use). Its a very good design that would seem to work on a QD thats slightly bigger than a standard slot. So im assuming by the way its designed that if the qd is slightly off or bigger size it will accommodate. Since as you screw down the top and sliding lock tabs into the sides of the qd ring. There are two lips that interface with QD ring. I used this on a front QD that doesnt have rotational stops. It really shines their for usability! I would take more care applying it to a qd that has a lot of anti rotation stops like a modern sopmod stock. Versus a qd slot that doesnt have any anti-rotations like what i used this for. Trying to interface the two lips where the ballbearings would sit on an anti-rotational QD. You will need a 9/64 hex key just so you are aware to have one when the adapter arrives at your house. Comes lock tight, but might not be as good depending how long its been in storage so maybe have some blue locktight ready.
Just what I was looking for
Fits tight in QD socket and does not rotate. Works perfect on my Lancer System and Magpul sling mount. Getting 2 more for my Sig M400 lower
They don’t work.
They don’t tighten up correctly, and pull free when weight is put on the sling. I bought a pair of these from Brownells. Any other vendor, and I would suspect they were knockoffs. Perhaps I just received lemons?
